Please Note: Due to the limited availability and shortage of stock please ask us if item is in stock before placing order.
Key Features
Your fast track to nitro buggy racing
4mm T-6 aluminum chassis plate
Gen III radio tray for longer servo life
Dynamite® .21 nitro engine with pull start
Pre-set suspension geometry
Metal-gear transmission and sealed differentials
Center and rear dogbones
15mm adjustable oil-filled shocks
Spektrum™ waterproof metal-gear servos
Includes Spektrum DX2E DSMR® transmitter
Includes Dynamite 1600mAh 6V NiMH receiver pack
Needed to Complete
20-30% Nitromethane fuel
Nitromethane-Approved Dispenser
NiMH Charger
Glow Igniter
What's in the box?
(1) 8IGHT 4WD Nitro Buggy RTR
(1) DX2E Transmitter
(4) AA Batteries
(1) Dynamite 1600mAh 6V NiMH receiver pack
(1) 4-Way Cross Wrench
(1) Bind Plug
(1) User Manual
Overview
If you are serious about becoming a competitive nitro buggy racer, this is the place to start. The Losi® 8IGHT Nitro Buggy RTR comes completely assembled and equipped with the brute power of a Dynamite® .21 nitro engine and the precise response that only a Spektrum™ DSMR® radio system can provide. You also get the benefit of a pre-set suspension that shares the same geometry team drivers use on their 8IGHT buggies. As your skills progress and you gain more racing experience, you can gradually upgrade the vehicle's performance with many of the 8IGHT option parts currently available.
Race-Proven Durability
In addition to its 4mm T-6 aluminum chassis plate, the 8IGHT Nitro buggy uses a Gen III radio tray that prolongs steering and throttle servo life with features like ball-bearing linkages and more accurate linkage alignment. It has been designed to resist wear and tear from chassis flex, too.
Brute Power
A powerful Dynamite .21 nitro engine gives you all the grunt you need to be a front runner, right out of the box. It is equipped with a convenient pull-start so you don't have to buy a starter box to get racing right away.
Metal-Gear Drivetrain and Sealed Differentials
A metal-gear transmission and sealed differentials give the buggy all the durability it needs for long mains and rough conditions.
Center and Rear Dogbones
These eliminate the friction of a CV coupler and improve bump handling in the rear of the car.
Pre-Set Suspension Geometry
The suspension geometry is pre-set from the factory to match that used by professional team drivers so you can hit the track with confidence. And because it uses fixed-length turnbuckles and steering arms, you know it will remain consistent race to race.
Specs
Approximate Assembly Time: No assembly required
Ball Bearings: Yes
Batteries: Dynamite NiMH Battery 6V 1600mAh Reciever Pack 3+2 Hump
Body: 8IGHT Cab -Forward, Screened
Brakes: Composite Disc with Steal Pads
Bushing Material: Metal
Chassis: 4mm, 6061 T-6 Aluminum
Completion Level: Ready-To-Run
Differential: Sealed viscous filled gear differential
Drivetrain: 4WD
Engine Size: .21 Dynamite
Final Drive Ratio: 11.5:1
Front Track: 12.0 in (305mm)
Fuel Tank Capacity: 125cc (4.2 Oz)
Gear Pitch: 1.0 Module
Ground Clearance: 2.4 in (60mm)
Height: 7.1 in (180mm)
Internal Gear Ratio: 3.92:1
Length: 19.6 in (497mm)
Painted or Clear Bodies: Painted
Pinion: 17T
Radio: Spektrum DX2E 2-Channel
Rear Track: 12.1 in (307mm)
Servos: Included
Shock Type: 16mm Big Bore Aluminum Oil Filled
Size/Scale: 1/8
Spur Gear: 50T
Suspension: Independent
Tire Compound: Medium
Tire Diameter: 4.4 in (111mm)
Tire Tread: XBT
Track: 12.1 in (307mm)
Vehicle Type: Buggy
Weight: 7.8 lb (3.5kg)
Wheel Diameter: 3.3 in (83.5mm)
Wheel Type: Dish
Wheel Width: 1.7 in (42mm)
Wheelbase: 12.7 -12.9 in (323-327mm)
Width: 12.1 in (308mm)
