Matek 36x36 PDB with 5v and 12v BEC 3A

The Matek PDB has been engineered to provide the highest possible performance and reliability in a 36*36mm & 4 layers PCB. The HUB distributes power from a battery pack to 4 ESCs, as well as providing synchronised & regulated DC outputs for powering cameras, servos, video transmitters, LEDs, etc. Batteries may range from 3S to 6S LiPo. The HUB also features convenient solder bridge of various voltage for camera & video TX.

General

• Input voltage range (3S-6S operation): 9 - 26VDC
• Regulated 5V and 12V outputs
• LED power indicators ( 5V & 12V outputs )
• 4 ESC outputs

Outputs

• Continuous current: 20A per output
• Peak current (10 seconds/minute): 25A per output

BEC 5V output:

• Designed for RC Receivers, Flight controllers, OSD, and Servos.
• DC/DC synchronous buck regulator, Efficiency is up to 95%.
• Voltage: 5.0 +/- 0.1VDC
• Continuous current: 3 Amps
• Short-circuit tolerant (10 seconds/minute)
• LED (indicates voltage is in regulation)

BEC 12V output:

• The battery should be 4S~6S LiPo
• Standard output designed to power cameras and video transmitters,etc. 
• Voltage: 12.0 +/- 0.2VDC
• Continuous current: 2 Amps (Max.3A 10s/minute)
• Short-circuit tolerant (10 seconds/minute)
• LED (indicates voltage is in regulation)

CAM & VTX voltage bridge

• 3S operation. choose VCC for 12V camera & 12V VTX, VCC=Battery Voltage.
• 4~6S operation, choose 12 for 12V camera & 12V VTX
• 3~6S operation, choose 5 for 5V camera
• Video pass through from the CAM pad to the VTX pad

Physical

• Dimensions: 36 x 36mm
• Weight: 6g 

Download the Manual