Mayflash PS3 VGA Cable / Wii VGA Cable (2-in-1) with Stereo RCA Audio

This cable will allow you to connect any PS3 or Wii Gaming console to any screen with a VGA / D-Sub / HD15 port.

Description

● Transfer pictures from the Wii and PS3 console that can be displayed on a ANY display with a VGA port (15 pins, 3 rows of 5 pins each).
● The resolution of the pictures is 480p (640*480) when connecting with the Wii game console. The resolution of the pictures is controlled through the game console.
● The resolution of the output pictures is 480p / 720p / 1080i / 1080p when used with the PS3 game console.
● The product will only work properly once the settings are set up properly with the Wii or PS3 game console.
● The frequency of the output pictures is 50 / 60 / 75HZ. Your display must be able support these refresh rates.
● Audio output signal port is compatible with speakers and a headphone..
● Power consumption: 150MA-200MA, supplied by game console..

Features

● Separate signal input ports for Wii and PS3.
● One RGBHV / VGA signal output, 15 pin, can be connected to PC monitor or HDTV / Projector that has a VGA / D-SUB Input.
● Red and white stereo signal output with RCA ports.
● Green RCA port is a colorless video output port, which is used to adjust the output format of game consoles.
● No need for an extra power supply.
● 160cm length VGA cable.

Connection Diagram

Package contents

● Wii / PS3 VGA Cable
● 15 Pin VGA Male to Male Adapter / Gender Changer (To Convert Female VGA to Male VGA if needed)

Wii Installation Instructions

Step 1 : Insert the Wii AV port to AV MULTIOUT port of Wii game console.
Step 2 : Insert the green plug on the VGA cable to any AV / RCA (Composite / Yellow RCA) video input on a LCD / HDTV. This cable is used to configure the console only.
Step 3 : Start Wii game console, turn on the TV, select AV input where green RCA is plugged in and the picture of the Wii game console will appear on the TV screen. Note : The pictures on the TV screen is black and white when being configured.
Step 4 : Connect the VGA plug on the cable to the VGA / D-Sub / HD15 input on any Plasma, LCD or Projector. No picture will appear at the moment, but if any picture is shown, game can be started without configuring the console.
Step 5 : Configure options as listed in Step 6 - 13.
Step 6 : Wii Option
Step 7 : Wii Settings
Step 8 : Screen
Step 9 : TV Resolution
Step 10 : EDTV or HDTV(480P)
Step 11 : Confirm
Step12 : Wii game console will restart automatically or turn on the power of Wii game console manually.
Step13 : Switch to VGA input on LCD where cable is connected to. The picture of the Wii game console will appear on display. All configuration has been done and games can be started.

PS3 Installation Instructions

Step 1 : Insert the PS3 AV plug on VGA cable into the PS3 AV MULTIOUT port.
Step 2 : Insert the green plug on the VGA cable to any AV / RCA (Composite / Yellow RCA) video input on a LCD / HDTV. This cable is used to configure the console only.
Step 3 : Connect and start PS3 game console, turn on the display and switch to AV input on which green RCA is connected to. Startup screen of PS3 will be in black and white while configuration is done.
Step 4 : Connect the VGA plug of cable to the VGA / D-sub / HD15 port on display. Usually there will be no picture currently, but if any picture is shown, game can be started without configuring the console.
Step 5 : Configure settings as in Step 6 - 15.
Step 6 : Settings
Step 7 : Display Settings
Step 8 : Video Output Settings
Step 9 : Component / D-Terminal
Step 10 : Change and press ”Enter” to the next step.
Step 11 : Select all or part of 480p, 720p, 1080p or 1080p and right click the pad.
Step 12 : Switch to VGA input on display and PS3 picture will appear on the display. If not swop back to AV input and click “YES”, which should be done within 30 seconds otherwise step 7,8,9,10 have to be set again. If there is a picture on VGA input "YES" should be clicked within 30 seconds.
Step 13 : After the above steps, follow the instructions from the display to save the setting.
Step 14 : Set audio output port. Select Scart to AV Multi.
Step 15 : Confirm
Step 16 : There are twice confirmation and saving while setting PS3 console settings. After the settings, games can be played without restarting.