Mecer 1200VA 720W 12V Inverter - Secondhand
   IVR-1200LBK
 
 **Please note that batteries are not included and needs to be bought separately**
   This unit is also intended for use with IT equipment and will not be able to run a kettle, heater or anything that uses a motor or an element.
Features:  
  - Simulated sine wave inverter  
  - Built-in AVR for voltage regulation  
  - Wide input voltage range: 90-280 VAC  
  - 12VDC available  
  - Overload and short circuit protection  
  - LCD display for comprehensive information  
  Specifications:  
  - MODEL Mecer IVR-1200LBK  
  - CAPACITY 1200 VA / 720 W  
  - POWER FACTOR 0.8  
  - Input Voltage range 90-280VAC  
  Line Mode:  
  - Output Voltage  
  - Bypass mode: 0utput voltage same as input voltage  
  - AVR mode: Output voltage = Input voltage 1.2 at Input voltage - Output Frequency Same as input  
  Battery Mode (BATTERIES NOT INCLUDED):  
  - Output Voltage 230Vac +/-10%  
  - Transfer Time 20ms typical  
  - Waveform Modified Sine-wave  
  Overload Capability:  
  - Bypass Mode (in VA and Watts) Load >110%+/-15% , alarm 5 mins then fault  
  - Load >130% +/-15%, fault immediately.  
  - AVR Mode (in VA and Watts)at Input voltage > 170VAC Load >100%+/-15%, go to bypass mode  
  - AVR Mode (in VA and Watts)at Input voltage < 170VAC Load >60%+/-15%, go to bypass mode  
  - Battery Mode (in W) Load>110% +/-15%, overload alarm for 15s, and then will switch to fault mode for 10s. Then unit will re-start for 5 times Load>120% +/-15% , fault & cut off O/P immediately.  
  Short Circuit Protection:  
  - Line Mode Breaker  
  - Battery Mode Current limit +Firmware Protection  
  Battery specs needed (NOT INCLUDED):  
  - Battery Voltage 12VDC  
  - Acceptable Battery Type Rechargeable lead-acid battery, Deep discharge battery  
  - Polarity Reserve Protection Yes  
  - Charger available I/P range 90 280V  
  Charger:  
  - Constant Current Charger Voltage 14.3VDC +/-2%  
  - Floating Charge Voltage 13.7VDC +/-2%  
  - Maximum Charge Current 10A or 20A  
  - DC Start Voltage >11VDC  
  Physical:  
  - Dimension, D X W X H (mm) 350 x 90 x 300  
  - Net Weight (kgs) 4.5  
  Environment:  
  - Operating Humidity 0 to 90% Relative Humidity(Non-condensing)  
  - Operating Temperature 0 degrees C to 40 degrees C  
  - Storage Temperature -15 degrees C to 50 degrees C  
  - OUT of box
 No Warranty but item was TESTED and in 100% working condition