MECER 2400VA 1440W 24V INVERTER (Not Compatible with Lithium Batteries)

Mecer 2400VA, 1400W, 24V DC-AC Inverter (Modified Sine Wave)LCD Display Please note that this unit will not turn on if not connected to at least two 12V batteries connected in series for 24V.The fan will turn off once the batteries are fully charged! Cables to connect the unit to a battery are included. A 220V power cable is included to recharge the battery while the power is on.May be used as an inverter (to power 220V devices such as TVs from a battery) or a UPS (runs the device from the standard 220V power while the battery charges) *EXTERNAL BATTERIES REQUIRED* MODEL: Mecer IVR-2400LBKCAPACITY: 2.4KVA/ 1440WPower Factor: 0.6Intput voltage range: 90-280VAC LINE MODEOutput voltage: Bypass mode: 0utput voltage same as input voltage AVR mode:Output voltage = Input voltage*1.2 @ Input voltageOutput Frequency: Same as input BATTERY MODEOutput voltage: 230Vac 10%Transfer Time: 20ms typicalWaveform: Modified Sine-wave OVERLOAD CAPABILITYBypass Mode (in VA and Watts): Load >110%15% , alarm 5 mins then fault Load >130% 15%, fault immediately.AVR Mode (in VA and Watts)@ Input voltage > 170VAC: Load >100%15%, go to bypass modeAVR Mode(in VA and Watts)@ Input voltage < 170VAC: Load >60%15%, go to bypass modeBattery Mode (in W): 1) Load>110% 15%, overload alarm for 15s, and then will switch to fault mode for 10s, Then unit will re-start 5 times. 2) Load>120% 15% , fault & cut off O/P immediately. SHORT CIRCUIT PROTECTIONLine Mode: BreakerBattery Mode: Current limit +Firmware Protection BATTERYBattery Voltage: 24VDCAcceptable Battery Type: Rechargeable lead-acid battery, Deep discharge batteryPolarity Reserve Protection: YesCharger available I/P range: 90~280V CHARGERConstant Current Charger Voltage:28.6VDC 2%Floating Charge Voltage: 27.4VDC 2%Maximum Charge Current: 10A or 20ADC Start Voltage: >22VDC PHYSICALDimension, D X W X H (mm): 350 x 90 x 300Net Weight (kgs): 5.5" What's in the box1 x Mecer 2400VA (1440W) Inverter Battery Charger