Nazgul Evoque F5D V2 HD BNF - 6S
Check my rate
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Product details
This iFlight BNF Nazgul Evoque F5D V2 HD features the DJI Camera.
We also carry the iFlight BNF Nazgul Evoque F5X HD.
The new iFlight Nazgul Evoque is a true work of art. They have added stack protectors to make sure you never have unwanted debris on your stack. The XT60 connector is mounted to the body, meaning that it cannot shift in flight leading to a cut lead. It also sports built-in LEDs to make sure your drone is always the center of attention.
Features
- Lightweight Side Panels - Keep Your Rig Clean
- Secured Integrated XT60 Battery Plug - As Safe, It Can Be
- High-Performance Electronics - New Blitz Mini Stack
- XING2 Performance Motors - The Best Motors Just Got Better
- Illumination - Let It Be Green!
- Digital HD Experience - DJI O3 Airunit and camera
Specifications
- Weight: 412g
- Propeller Size: 5"
iFlight Blitz Mini F7 FC
- MCU: STM32 F722
- Gyro: MPU6000
- Baro: NO
- OSD: IFLIGHT OSD AT7456E
- BEC: 5V 2.5A
- BlackBox: 16MB
-
UARTS: 5
UART1 for VTX HD/Analog
UART2 for Receiver
UART3UART4 for GPS or other sensors that require a serial port
UART6 for ESC Telemetry - 1x I2C
- 1xSH1.0 9pin connector for HD VTX/Analog VTX&CAM 5V/BAT/G/VO/T1/R1 /5V/G/VI
- 1x SH1.0 8pin connector for ESCR6/CUR/M4/M3/M2/M1/BAT/G)
- 1x SH1.0 6pin connector for Any Receiver or DJI3V3/R2/5V /G/R2/T2
- 1x SH1.0 4Pin connector GPS (T4/R4/G/5V)
- 1x SH1.0 4Pin connector LED&Beeper (BUZ/LED/G/5V)
- 4x 0402 LEDs for FC STATUS (3.3V Red) / (Start Blue) / (5V Green)/BAT Orange
- VTX protocol: Smartaudio & IRCTramp supported
- WS2812 LED StripYes
- BeeperYes
- Firmware: IFRC-IFLIGHT_BLITZ_F722
- Dimensions: 30.5*27mm / 20*20mm 4 mounting
- Weight: 5.0g
iFlight Blitz Mini E55A 4in1 ESC
- Input: 2-6s LiPo
- Constant: 55 Amps (per channel)
- Burst: 60 Amps (per channel)
- MCU: BB21
- Target: QH-50 16.7
- BEC: No
- BlHeli32 telemetry: Yes
- Dimensions: 42x35mm
- Mounting Dimensions: 20x20mm, 3mm (2mm w/ grommets)
- Weight: 11.3g
DJI Camera
-
Product Name: DJI O3 Air Unit
Weight: Approx. 36.4 gramsheadband included
Communication Bandwidth Max 40 MHz
FOV (single screen): 155
Communication Frequency2.400-2.4835 GHz (RX only) / 5.725-5.850 GHz (RX and TX)
End-to-End Latency
With DJI FPV Goggles V2:
810p/120fps Video Transmission Quality: The latency is lower than 28 ms.
810p/60fps Video Transmission Quality: The latency is lower than 40 ms.
With DJI Goggles 2:
1080p/100fps Video Transmission Quality: The latency is as low as 30 ms.
1080p/60fps Video Transmission Quality: The latency is as low as 40 ms.
Max Video Transmission Bitrate: 50 Mbps
Max Video Transmission Range10 km (FCC), 2 km (CE), 6 km (SRRC)
Operating Temperature Range: -10 to 40 C (14 to 104 F)
Power Input: 7.4-26.4 V
Audio Transmission: N/A
Includes
- 1x iFlight BNF Nazgul Evoque F5D V2 HD Deadcat 5" Quad w/ DJI O3 Airunit - 6S
NB Excludes
- Receiver
