| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
AdvancedNetwork Cable Tracker Tone Generator and Probe Kit with Cable TestingCapabilities like Wiremap, Length, PoE
NetworkCable Ethernet Tester With PoE NCV Multi-Function Line Tracker LAN CAT5 CAT6Tracker LCD Display Measure Length Wiremap Tester
3 CableTracing Modes - Digital, Analog, and PoE.
In digitalor analog mode, the tone generator sends strong, clear toning to let you findcables faster. If the cable you need to identify is plugged in a PoE switch,the PoE scan mode will make the cable tracing more precise.
The NF-8209allows you to do wire map testing and check 5 common connection problemsincluding open, short, cross, split, and reversed pairs, measure the length ofLAN cables with range of 2.5m - 500m, test the info of PoE devices such as PoEvoltage, power supply polarity and mode, type of PSE (AF or AT standard).
Port Flash& Switch Details Test.
The portflash feature enables you to locate network ports by flashing port light onswitches or routers, and will tell you the connected switchs info like itsspeed, transmitting mode, and protocol.
128x64 DotsGraphic LCD Display.
The NF-8209cable tracker comes with a bright and easily discernible LCD display making itmuch easier to use. Any cable issues can be easily identified and tracked justfrom looking at the visual and well-lit tester display.
Multi-Function
Continuitytest, cable fault test, PoE test, port flash, Rj45 cable tester,CAT5e/CAT6/CAT6a
PoE testand hub blink
Identifywhich pins are being powered, detect PoE voltage, current, power, and theability to identify PSE type (at/af standard). Locate network ports by blinkingport lights on Hub/Switch, can be used for 10M/100M/1000M hubs/switches Measurefault distance tdr nf-8209 to LAN cable faultdistance for accurate positioning. Accurate measurement of cable length, therange of 200 meters, is a professional cabling engineers and finder home repairnecessary tools
Cablepass-through test & NCV Equippedwith headphones, easy to carry, with anti-interference hunting mode, can bematched with the remote control to implement 1V1 line, can test the shieldednetwork cable hub flicker and NCV function, test the physical state of STP andUTP network cable. Detect the presence of AC voltage (50V-1000V)
Non-contactVoltage (NCV) Detecting. The receiver (the tone probe) can be used to detect ACvoltage presence.
Technical Index
Transmitter Wiremap
Cable type: CAT5CAT6 (STP &UTP)
Test withswitch directly: Yes
Max range: 600m
Test range: 2~200m
Accuracy: ±1.6m
Breakagelocation: Yes
Scan
Cable type: CAT5CAT6 (STP &UTP)
Max. signalvoltage: 8Vp-p
Frequency: 130KHz
AC filter : Yes
Max range 600m
POE
Test range: DC 5~60V standard / non-standard PoEswitch
Voltagedisplay Yes
PoE type: IEEE 802.3af/at
LCD display: 128*64 Dot-matrix with backlight
Powersupply: AAA*3 (Not included)
Low batterywarning: 2.7V
Auto-offtime: 15min30min60minOFF
Voltageprotection: DC48V 5mA
Max workingcurrent: <150mA
Receiver
Sensitivityadjustable: Yes
AC Voltagedetecting: Yes
Lamp: Yes
Batterytype: 9V*1 (Not included)
Low batterywarning: 6± 0.5V
Max workingcurrent: <100mA
Remote
WiremapPort: RJ45
Voltageprotection: DC48V 5mA
