NK-H38 4K HDMI Audio Splitter Converter
New
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 15 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
International
Product code
EDA0024832
Bob Shop ID
593687906
Features:
1. One HDMI input to HDMI video + HDMI 7.1CH audio + audio (SPDIF+3.5mm) output
2. Output audio support: HDMI 7.1CH+SPDIF+3.5mm analog audio output
3. Input resolution: up to 2160p60
4. HDMI realizes the synchronization of audio signal separation, and there are three audio mode choices of 2.0CH/5.1CH/7.1CH
5. LED indication: when the source or sink is working, the LED is relatively bright
6. No quality loss
7. Install in minutes
8. Requires DC5V power supply
9. Support ARC
Notice:
1. When you use the ARC function, please make sure the spdif port light is red, which means the converter gets the signal and the TV needs to support ARC
2. When you turn on ARC, the TV remote control will not be able to control the volume, you can only adjust the volume on the speaker/stereo/home theater
3. Do not plug the HDTV into the HDMI input of the converter, otherwise you will not be able to get any signal
1. One HDMI input to HDMI video + HDMI 7.1CH audio + audio (SPDIF+3.5mm) output
2. Output audio support: HDMI 7.1CH+SPDIF+3.5mm analog audio output
3. Input resolution: up to 2160p60
4. HDMI realizes the synchronization of audio signal separation, and there are three audio mode choices of 2.0CH/5.1CH/7.1CH
5. LED indication: when the source or sink is working, the LED is relatively bright
6. No quality loss
7. Install in minutes
8. Requires DC5V power supply
9. Support ARC
Notice:
1. When you use the ARC function, please make sure the spdif port light is red, which means the converter gets the signal and the TV needs to support ARC
2. When you turn on ARC, the TV remote control will not be able to control the volume, you can only adjust the volume on the speaker/stereo/home theater
3. Do not plug the HDTV into the HDMI input of the converter, otherwise you will not be able to get any signal