OCXO 10MHz 20M 30M 80M Constant Temperature Crystal Oscillator Module Frequency Reference
New
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 12 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Returns
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
International
Bob Shop ID
615103460
Constant temperature crystal module description:
This module outputs the frequency accuracy of the 10MHz signal (+/-200ppb), has two signal outputs, and one is a standard 10MHz signal. The other is a 10MHz multiplier signal. The multiplier signal has 9 selection frequencies, which are 2X, 3X, 3.125X, 4X, 5X, 5.3125X, 6X, 6.25X, 8X. The different multipliers are selected by the JP1 jumper pin. Correct the deviation of the 10Mhz output frequency (+/-2.0ppm) with the RV1 potentiometer.
1. P1: Power input interface; (7~9V). 2. P2: 10MHz signal output interface; (10Mhz amplitude: 3Vpp) SMA interface 3. P3: N frequency output interface of 10MHz signal; (N*10Mhz amplitude: 5Vpp) SMA interface 4. RV1: Correct the deviation of the 10Mhz output frequency (+/-2.0ppm) 5. JP1 jumper needle selection
S1=0,S0=0, OUT = 4X S1=0,S0=M, OUT = 5.3125X S1=0,S0=1, OUT = 5X S1=M,S0=0, OUT = 6.25X S1=M,S0=M, OUT = 2X S1=M,S0=1, OUT = 3.125X S1=1,S0=0, OUT = 6X S1=1,S0=M, OUT = 3X S1=1,S0=1, OUT = 8X
0 = connect directly to ground(L) 1 = connect directly to VDD(H) M = leave unconnected(floating)
Package includes:
1 x Constant temperature crystal module
This module outputs the frequency accuracy of the 10MHz signal (+/-200ppb), has two signal outputs, and one is a standard 10MHz signal. The other is a 10MHz multiplier signal. The multiplier signal has 9 selection frequencies, which are 2X, 3X, 3.125X, 4X, 5X, 5.3125X, 6X, 6.25X, 8X. The different multipliers are selected by the JP1 jumper pin. Correct the deviation of the 10Mhz output frequency (+/-2.0ppm) with the RV1 potentiometer.
1. P1: Power input interface; (7~9V). 2. P2: 10MHz signal output interface; (10Mhz amplitude: 3Vpp) SMA interface 3. P3: N frequency output interface of 10MHz signal; (N*10Mhz amplitude: 5Vpp) SMA interface 4. RV1: Correct the deviation of the 10Mhz output frequency (+/-2.0ppm) 5. JP1 jumper needle selection
S1=0,S0=0, OUT = 4X S1=0,S0=M, OUT = 5.3125X S1=0,S0=1, OUT = 5X S1=M,S0=0, OUT = 6.25X S1=M,S0=M, OUT = 2X S1=M,S0=1, OUT = 3.125X S1=1,S0=0, OUT = 6X S1=1,S0=M, OUT = 3X S1=1,S0=1, OUT = 8X
0 = connect directly to ground(L) 1 = connect directly to VDD(H) M = leave unconnected(floating)
Package includes:
1 x Constant temperature crystal module
