Olarm LINK - IO Port & Relay Extender for Olarm PRO and Olarm MAX / 6 Ports / Sensor

* The Olarm LINK will require an Olarm communicator with an active subscription to function.

Olarm LINK is smart control and sensing device allowing users to control a wide range of peripherals such as gate motors, garage motors, boom gates, water pumps, and more.

Smart Management: Easily and conveniently access control for gates, lights, booms, doors, and more using the Olarm APP.
More Monitoring: Convenient real-time monitoring of device statuses such as open, closed, AC fail, battery status, tamper, and alarm.
Precise Control: Efficiently control devices such as on, off, latch, pulse, open, and close, optimizing their functionality to suit your needs.

Features

- DIN Rail mountable (plastic DIN rail included)
- 6x Protected general-purpose IO Ports which can either be used as inputs or open drain outputs.
- Analog sensor port for use with either 4-20mA or 0-14V sensors.
- 2 high current relays allow for control of AC loads or high-current DC loads.
- 2 tamper switches.
- RGB status indication light.
- Olarm One-Wire Serial comms bus interface to supported Olarm communicators allowing for up to 8 Olarm LINK to be connected to one communicator.

Specifications

- Dimensions (L*W*H): 95*70*37 mm 
- Weight: 107g

Connectivity (Via an Olarm PRO, Olarm PRO 4G, or Olarm MAX communicator.)

- Protocol: Olarm One-Wire Serial
- Max cable length: 8 meters

Technical Details

- 2x Relays: 10A @ 240 VAC, 10A @ 28 VDC
- 6x I/O Ports: 0-20 VDC, 120 mA max
- 1x Sensor: 4-20 mA, 0-15 VDC
- Power: 7-24 VDC, 25 mA (typical), 250 mA (max)

General Purpose IO Ports 

- Number of ports: 6
- Voltage tolerance: 0-20 VDC
- Max open drain current: 120 mA

Relays

- Number of relays: 2
- Contacts per relay: 1x Normally Open (NO), 1x Normally Closed (NC)
- Max voltage: 240 VAC / 28 VDC
- Max current: 10 A

Power supply

- Input voltage: 7 to 24 VDC
- Current consumption: 25mA (typical), 250mA (max) at 12 VDC

Configuration

- Auto-detection when connected to an Olarm communicator. Follow the instructions in the Olarm APP once connected and LED is blue.

What's in the box

- 1x Olarm LINK
- 1x 1.5m communications cable
- 1x Plastic DIN rail
- 1x DIN rail clip
- 2x screws & 2x wall plugs