Main centres: | 1-3 business days |
Regional areas: | 3-4 business days |
Remote areas: | 3-5 business days |
OptiMate 5 with 2.8Amps is the ideal all in one tool to care for your cruiser motorcycle, boat or car battery.
In a weatherproof sealed enclosure that includes wallmounts, the OptiMate 5will diagnose, recover, charge, test and maintain your batteries automatically. Recommended for STD (with removable filler caps), sealed AGM (absorbed glass mat) & sealed GEL 12V lead-acid batteries from 8Ah to 120Ah, although it can also maintain larger batteries (it will just take longer to charge).
Forgot to switch off the ignition / lights or did not hook up the battery to a maintainer during off-season and now the battery is ‘dead’? There is no need to rush out and buy a new battery as OptiMate 5 has been proven to save neglected, deep discharged batteries down other smart chargers can’t. Save and recharge your 20Ah cruiser motorcycle battery within 12 hours from dead flat!
Think that batteries only last 2-3 years? OptiMate 5 has been proven to extend battery life to 400%; batteries can last 8 years if maintained with OptiMate 5. To make this work always hook up OptiMate 5 to the battery when the vehicle is parked and it will safely maintain the battery at 100%, never overcharging, thanks to its unique 30 min charge, 30 min rest cycle during every hour of long-term maintenance charge.
Technical Specifications
Recommended for AGM/MF, Standard, GEL and spiral cell batteries from 7.5Ah to 120Ah rated capacity.
Programme control: 5 stages, fully automatic
Input current max: 0.90A @ 100-240V
Reverse drain current: less than 0.5mA
Output current (bulk charge): 2.8A
Automatic desulfation: yes
Charge time limit: Safe to leave connected for months
Maintain/test cycles: 30 min/30 min (alternating hourly)
Charge retention test: monitors during 30min., no charge intervals
Dims: 190 x 75 x 56mm
Weight: 0.9 kg
Enclosure classification: IP54
Mounting easy direct wall mounting
Input cable length: 2m
Output cable length: 2m
Included Accessories: SAE-71 fused eyelet set, weather protected; SAE-74 clamps set for bench charging
Operation temperature range: -20°C/+40°C
Warranty: 3 years