TEKNOSA Front Outer CV Joint (Left or Right) for Audi A6 C6 - AD3010
Check my rate
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
This TEKNOSA Front Outer CV Joint (Left or Right) is listed for Audi A6. Confirm compatibility by matching the listed fitment details. Verify VIN/engine.
| Specification | Value |
|---|---|
| Outer Spline | 38 |
| Inner Spline | 27 |
| Seal Size | 59.5mm |
| Outer Diam. | 98.8mm |
| Groove Position | Middle |
| Length | 97.5mm |
This cv joint is listed for 18 deduplicated applications covering Audi A6 C6 (2004-2011). Use the full table below to confirm model, chassis / platform, year range, engine and power before ordering.
View Full Vehicle Fitment (18 applications)| Model | Chassis | Years | Engine | Power |
|---|---|---|---|---|
| A6 | C6 | 2004-2008 | 3.2 FSi (AUK) | 188 kW |
| A6 | C6 | 2004-2008 | 2.0 TDi (BRE) | 103 kW |
| A6 | C6 | 2004-2008 | 2.0 TFSi (BPJ) | 125 kW |
| A6 | C6 | 2004-2008 | 2.8 (BDX) | 154 kW |
| A6 | C6 | 2004-2008 | 2.8 FSi (CCEA) | 162 kW |
| A6 | C6 | 2004-2008 | 2.4 (BDW) | 130 kW |
| A6 | C6 | 2004-2011 | 2.0 TDi (BNA,CAGB) | 100 kW |
| A6 | C6 | 2005-2006 | 2.0 TDi (BVG) | 89 kW |
| A6 | C6 | 2005-2008 | 3.2 FSi (AUK) | 188 kW |
| A6 | C6 | 2005-2008 | 2.4 (BDW) | 130 kW |
| A6 | C6 | 2005-2008 | 2.0 TDi (BLB,BRE) | 103 kW |
| A6 | C6 | 2005-2011 | 2.0 TFSi (BPJ) | 125 kW |
| A6 | C6 | 2006-2008 | 2.8 (BDX) | 154 kW |
| A6 | C6 | 2008-2011 | 2.0 TDi (CAHA) | 125 kW |
| A6 | C6 | 2008-2011 | 2.0 TDi (CAGB) | 100 kW |
| A6 | C6 | 2008-2011 | 2.8 FSi (CCDA) | 140 kW |
| A6 | C6 | 2008-2011 | 2.8 FSi (CCEA) | 162 kW |
| A6 | C6 | 2009-2011 | 3.2 FSi (CALA) | 195 kW |
Important: With CV joints and driveshafts, a VIN check can still return multiple possible variants within the same model range. First confirm whether you need an inner CV joint, outer CV joint, CV boot, or complete driveshaft. Then match the removed unit by outer spline count, inner spline count, seal size (mm), outer diameter (mm), groove position, overall length (mm), and ABS ring tooth count where applicable. The only reliable way to confirm the correct part is to physically inspect and measure the old unit and match these specifications before ordering.
Returns Notice: CV joints, driveshafts, and boots that are greasy or incomplete are not returnable.
Will this front outer cv joint (left or right) fit my Audi A6?
This part (AD3010) is listed for the fitments shown on this page. Confirm by matching the fitment details. Verify VIN/engine.
How do I confirm fitment if there are multiple variants?
Compare the supplied fitment details, original part details and any listed variant information before ordering. Verify VIN/engine.