Vehicle Fitment & Part Details
This outer tie rod end set (male) (TR05988) is listed for the Jeep Grand Cherokee II (WJ, WG) and is sold as a set for both sides of the front axle, cross-referenced to OE 52088467. It has an M24 x 1.5 LHT thread and a length of 239 mm. Confirm compatibility by matching the listed fitment details and any OEM reference numbers supplied. Verify VIN/engine.
Key Details
- SKU
- TR05988
- Component
- Outer Tie Rod End
- Position
- Front Axle Outer
- Configuration
- Set (Both Sides)
- OEM References
-
- Jeep: 52088869AA
- Jeep: 52088467
- Jeep: 52088879AA
- Primary Fitment
- Jeep Grand Cherokee II WJ, WG (1998-2005)
- Specs
- M24 x 1.5 LHT thread; Length: 239 mm; Cone: 16 mm / 14.3 mm
Listing Highlights
- Listed for selected Jeep Grand Cherokee II (WJ, WG) applications shown in the fitment table.
- Cross-referenced to listed Jeep OE numbers for compatibility checking before ordering.
- Outer tie rod end set (male) with M24 x 1.5 LHT thread and 239 mm length.
Product Specifications
| Specification | Value |
|---|
| Fitting Position | Front Axle, both sides |
|---|
| Length | 239 mm |
|---|
| Thread Size | M24 x 1.5 LHT |
|---|
| Cone Size | 16 mm |
|---|
| Cone Size 1 | 14.3 mm |
|---|
Vehicle Fitment
This outer tie rod end set is listed for 8 applications covering the Jeep Grand Cherokee II (WJ, WG) across 4.0, 4.7 V8, 2.7 CRD and 3.1 TD variants, with supplied year coverage from 1998 to 2005. Use the full table below to confirm model, chassis, year range, engine and power before ordering.
| Model | Chassis | Years | Engine | Power |
|---|
| Grand Cherokee II | WJ, WG | 10/1998-09/2004 | 4.0 (ERH) | 140kW/190PS |
|---|
| Grand Cherokee II | WJ, WG | 04/1999-08/2000 | 4.7 V8 4x4 (EVA) | 162kW/220PS |
|---|
| Grand Cherokee II | WJ, WG | 04/1999-09/2005 | 4.7 V8 4x4 (EVA) | 164kW/223PS |
|---|
| Grand Cherokee II | WJ, WG | 10/2001-09/2005 | 4.7 V8 4x4 (EVC) | 190kW/258PS |
|---|
| Grand Cherokee II | WJ, WG | 06/2003-09/2005 | 4.7 V8 4x4 (EVA) | 167kW/227PS |
|---|
| Grand Cherokee II | WJ, WG | 10/2001-09/2005 | 2.7 CRD 4x4 (OM 665.921, ENF) | 120kW/163PS |
|---|
| Grand Cherokee II | WJ, WG | 10/2004-09/2005 | 2.7 CRD 4x4 (DDAB) | 120kW/163PS |
|---|
| Grand Cherokee II | WJ, WG | 04/1999-12/2001 | 3.1 TD 4x4 (EXA) | 103kW/140PS |
|---|
Fitment Notes
- Always match OEM reference number(s) and vehicle details before ordering. Verify VIN/engine.
- This tie rod end set fits the Grand Cherokee II (WJ, WG) 1998-2005 only. It does not fit earlier or later Grand Cherokee generations.
Compatibility Verification Notes
- Confirm compatibility using VIN, engine code, chassis / platform, OE reference and original part comparison before ordering.
- Match the supplied thread size, cone sizes and length to the original tie rod ends before ordering.
- Fitment data may vary by production date, market, import history and engine variant.
- This listing is for part identification and compatibility checking only. Installation must be carried out according to the vehicle manufacturer's service information by a suitably qualified person.
Common Questions
Will this outer tie rod end set fit my Jeep Grand Cherokee?
This part (TR05988) is listed for the fitments shown on this page. Confirm by matching the fitment details. Verify VIN/engine.
What OEM part numbers does this cross-reference?
Cross-reference numbers are listed in the Key Details section above. Match at least one to your original part before ordering.
How do I confirm fitment if there are multiple variants?
Compare the supplied fitment details, OE reference numbers, original part details and any listed variant information before ordering. Verify VIN/engine.
