Paradox PCS200 SMS

Paradox PCS200 GSM - SMS module

PCS200 will send you SMS messages as pre programmed by the user. Up to 8(16 with EVO) cellphone numbers can be programmed

Just plug into alarm system with cellphone sim card and enter required cellphone numbers through user programming options

Features:
Compatibility : EVO48 / EVO192 (V2.02) and K641 / K641R (V1.51), SP (V3.42) and K32LCD (V1.22), E55 panels (V3.0), E65 panels (V2.1), and MG Series (V4.0)

If any of your devices is below the above versions it can be updated using Winload software with a Paradox usb307 cable

GPRS Reporting : Report system events to the IPR512 Paradox IP Monitoring Receiver via GPRS.

Upload/Download via GPRS : Upload/download with WinLoad or NEware via a GPRS connection. GPRS allows internet communications through a GSM (cell phone) network at data rates of up to 38.8Kbit/s.

Firmware Upgrade via GPRS : The PCS200 or control panel firmware can be upgraded remotely via GPRS or directly on-site.

Report via text messages (SMS) : Select which event groups will send SMS messages to up 16 cell phones(Paradox EVO). Each text message contains event description, site name, date, time and any associated labels, such as area, zone and serial number. Event descriptions are pre-defined in the PCS200 module and are available in multiple languages (installer selectable).

Simple installation : The PCS200 is installed with a simple 4-wire serial connection up to 2m from the panel - included. The module antenna can be installed up to 18m from the module using optional antenna cable extensions depending on the local signal strength