Paraffin kerosene National CR2000R vintage heater - circa 1970's

Heater on stand: H 52 x W +/- 43 x L 37 weighs 7 kg.

Condition: Well cared for in good usable preowned condition - as per listing images.  

Note: The automatic lighting (ignition) is not functional, to ignite use a lighter or a match. 

The wick is brand new. Before using the heater you must fill the tank to the "F" level of the fuel gauge, and wait for round 30 minutes before igniting. The wick needs to soak before it is lit for the first time.

Precaution: After topping up the tank, wipe off all spilt kerosene (paraffin) that might have spilt on the outside of the heater. Screw the fuel tank cap tightly after filling. 

Trimming: If red flame or smoke comes out after ignition turn the chimney unit clockwise or counter clockwise. When the radiation net becomes red hot, turn the knob clockwise or counter clockwise and always adjust the flame to the "Proper flame condition"  

Specs: 

Fuel: Paraffin (kerosene). 

Power: Typically a heat output of around 2000 Watts or 2 kW. 

Fuel Consumption: Generally between 0.22 to 0.27 litres per hour. 

Tank Capacity: Around 5 litres for extended heating

Heating Area: Can heat spaces up to 15 m². 

Safety: Features a safety tank and is designed for safe operation. 

Ignition: Usually uses a match. 

Heat Output Range: Adjustable, from 800 to 2,200 Kcal/hour. 

The wire for the automatic ignition is broken - if you look at the above image

right side of the screw you will see it.

For shipping I have released the base - hence the screw holes. Screws for the base are packed with the heater.   

Supplied with a brand new wick.

The burner and its net are in good condition.