pH Meter Pen -Digital LCD - Batteries & Case included - Water Reader Tester- Yellow

CE certified Handheld Digital pH Meter Tester Pen with LCD Monitor. This versatile device allows you to conveniently measure and display both pH and temperature results simultaneously. Its pH test range spans from 0.00 to 14.00, and it operates effectively within a temperature range of 0 to 60 degrees Celsius. Equipped with Automatic Temperature Compensation (ATC) and a clear LCD monitor, this pH tester pen ensures fast and accurate readings in mere seconds.

As a tool to improve the quality of life. Can be used to test drinking water, swimming pools, pH balance in aquarium, RO system, spa or hydroponics. Basically all the environments that need to test pH value can use this tester to get accurate data.

Features and Specifications:
- CE certified
- Colour: Yellow
- Take quick and accurate readings in seconds
- Digital pH meter
- LCD indicator monitor
- Automatic temperature compensation function (ATC no need to care about the temperature of the liquid being measured)
- Glass electrode with reference sensor for readings
- Factory calibrated pH Buffer powders included (1x pH4.00@25C , 1x pH6.86@25C , 1x pH9.18@25C )
- Belt clip included
- 2x LR44 alkaline button batteries included
- Clear storage case included
- Water resistant

Test range: 00.0-14.00pH
Resolution: 0.01pH
Accuracy: +/-0.01pH
Power supply: 2x1.5V (batteries included)
Operating temperature: 0-60C
Calibration: three points automatic calibration (only 6.86 point calibration: the accuracy is 0.1pH)
Minimum EC/TDS for usage: 9.5 S/5 ppm

Note:
A pH value of 7 represents a neutral state. When the pH is below 7, it indicates acidity, with lower values signifying higher acidity. Conversely, when the pH is above 7, it indicates alkalinity, with higher values representing greater alkalinity.

Safety and usage guidelines:
- Do not touch the electrode
- Ensure the protective cap is consistently in place to prevent the electrode from drying out.
- Prior to and following each use, thoroughly clean the electrode.
- In case the meter fails to power on or the display becomes dim, follow these steps: Open the battery compartment, replace the battery while paying attention to its polarity, and then recalibrate the meter.