Phantom 3 Additional Battery

 Overview

The DJI Smart Battery is a  lithium-polymer battery designed for the Phantom 3 series. It features four LEDs that display remaining battery capacity. Power management is handled internally meaning the battery doesn’t require a separate balance lead to control charging.

Highlights

Keep spare batteries on hand to extend your enjoyment of the quadcopter
Capacity for up to 23 minutes of flying time
Slot-in design means no leads to detangle or connect prior to use
Four LEDs indicate remaining power and charge status
Power management handled internally – no balance connector required to charge
Charging The Battery

Batteries must be charged using a DJI approved adapter.DJI takes no responsibility if the battery is charged using a non-DJI charger. Never leave the battery unattended during charging. Do not charge the battery near flammable materials or on flammable surfaces such as carpet or wood.
Do not charge battery immediately after flight, because the battery temperature may be too high. Do not charge the battery until it cools down to near room temperature. Charging battery outside of the temperature range of 0¿-40¿ may lead to leakage, overheating, or battery damage.
Charge and discharge the battery completely once every 20 charge/discharge cycles. Discharge the battery until there is less than 8% power or until it can no longer be turned on, then recharge it to the maximum capacity. This power cycling procedure will optimize the battery life.
Battery Storage

Dispose of the battery into specific recycling boxes only after a complete discharge. Do not place the battery into regular rubbish bins. Strictly follow your local disposal and recycling regulations of batteries.
If the power on/off button of the smart battery is disabled and the battery cannot be fully discharged, please contact a professional battery disposal/recycling agent for further assistance.