PoE Ethernet / USB HUB BOX for Raspberry Pi Zero Series(Zero not included), 3x USB 2.0, 802.3af-C...
New
Indicative market price: R727.20
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 2 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
South Africa
Product code
2343
Bob Shop ID
613701599
PoE Ethernet / USB HUB BOX for Zero. Dull polish surface, well designed, nice & dust-proof. PoE 802.3af-compliant Ethernet Port | 3x USB 2.0 Ports.
Features at a glance
The PoE-ETH-USB-HUB-BOX is a HUB kit with PoE/ETH/USB HUB HAT inside. It is tailored for Raspberry Pi Zero series, small in size, each cut-out of the case is exactly aligned with the connector. The case adopts classic Raspberry Pi red/white color combination, with quality dull polish surface, effectively keeping the Zero away from dust. By using this small HUB BOX and some proper 802.3af-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi Zero in only one Ethernet cable, along with 3x extended USB ports.
Specifications
Compatible with Raspberry Pi Zero series
specialized pogo pin connection, dedicated cut-outs for Zero series, plug-and-play
1 x ABS case
1 x Rubber feet 4PCS
1 x Screws pack
Features at a glance
The PoE-ETH-USB-HUB-BOX is a HUB kit with PoE/ETH/USB HUB HAT inside. It is tailored for Raspberry Pi Zero series, small in size, each cut-out of the case is exactly aligned with the connector. The case adopts classic Raspberry Pi red/white color combination, with quality dull polish surface, effectively keeping the Zero away from dust. By using this small HUB BOX and some proper 802.3af-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi Zero in only one Ethernet cable, along with 3x extended USB ports.
- Designed for Raspberry Pi Zero, compatible with Zero series boards
- Incorporates RTL8152B Ethernet chip, with 10M / 100M auto-negotiation RJ45 port
- PoE (Power over Ethernet) feature, 802.3af-compliant
- Fully isolated SMPS (Switch Mode Power Supply)
- 3x extended USB ports, compatible with USB 2.0 / 1.1
- Angle rounded design, smooth hand feeling, "simple snap" case lid
- Quality ABS material, dull polish surface, anti-fingerprint
- Comes with two different lids, changing as you like
Specifications
- PoE power input: 37V ~ 57V DC in
- Power output: 5V 2.5A DC out
- Network standard: IEEE 802.3af-compliant PoE
- Dimensions: 72.80 37.50 45.80 mm
Compatible with Raspberry Pi Zero series
specialized pogo pin connection, dedicated cut-outs for Zero series, plug-and-play
3x extended USB 2.0 ports
USB1 ~ USB3, compatible with USB 2.0 / 1.1
USB1 ~ USB3, compatible with USB 2.0 / 1.1
Extended Ethernet port
USB to Ethernet conversion by the RTL8152B chip, 10M / 100M auto-negotiation
USB to Ethernet conversion by the RTL8152B chip, 10M / 100M auto-negotiation
Two different lids, change as you like
"simple snap" design, easy to change, allows attaching other Zero HATs
Application example
Outline dimensions
What's in the box?
1 x PoE/ETH/USB HUB HAT kit "simple snap" design, easy to change, allows attaching other Zero HATs
Application example
Outline dimensions
What's in the box?
1 x ABS case
1 x Rubber feet 4PCS
1 x Screws pack
Resources
Wiki: PoE/ETH/USB_HUB_HAT
Note: Stock is currently available in South Africa for national shipping!