R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable. Check my rate
Free collection
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 4 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Polishing and compound kit. Application: The kit includes a polishing buff and 5 solid polishing compounds. The. compounds are used with various metals. It can be used to remove stretcher. strains, orange peel, polishing wheel grit lines and light die marks etc. TIP: Spare polishing compound is available for the kit: TC804904. How to use the compounds and the buffing pad: The adaptor is used to hold the buffing pad in the drill's chuck. Fasten. the correct buffing pad in the adaptor./li>. It would be best to use a drill press to polish metals. If a drill press. is not accessable, use adaptor. TCV01810 with a portable drill with a collar. diameter of ø43mm. Tighten the adaptor in the drill's chuck. The buffing pad should revolve towards you at full speed. Pass the. compound lightly across the face of the buffing pad. To ensure that the. compound is evenly spread, hold a clean piece of scrap metal against the. face of the buffing pad. This will eliminate lumps of compound from. occuring. If desired, heat the item to 65°C using an oven or a heater. Warming. the metal keeps the compound on the buffing pad. A cool item will draw. compound from the pad and leave deposits. Use a glove to handle the warm. item. Hold the metal lightly against the buffing pad. Allow the compound to do. the work. If more compound is required, apply it using a wiping motion. Do not. overload the buffing pad.