Product Description
WaterWell Drop & Vac is a granular flocculant (alum powder) designed to eliminate cloudy water, remove suspended particles, and settle dead algae to restore crystal-clear pool water. This high-performance formula coagulates debris, causing it to sink to the bottom, making it easy to vacuum out of the pool for a visibly cleaner and healthier swimming environment.
If your pool water appears hazy, murky, or full of algae, Drop & Vac provides a fast and effective solution. Ideal for use after algae treatment or following heavy rainfall, this product helps restore clarity by binding particles together for easier removal.
Key Features & Benefits
Eliminates Cloudy Water
- Quickly clears hazy, dull, or milky-looking pools by settling suspended particles.
Removes Dead Algae & Debris
- Perfect for post-algae treatmentflocculates dead algae to be vacuumed out.
Fast-Acting Formula
- Works within 1224 hours, allowing quick restoration of water clarity.
Granular Flocculant for Heavy-Duty Cleaning
- Coagulates fine dust, dirt, and debris, ensuring a deep clean.
Easy to Use No Complicated Procedures
- Simply adjust pool chemistry, distribute, and let it workthen vacuum to waste.
Ideal for Algae Infestation Recovery
- Helps remove stubborn algae remnants, ensuring a fresh and inviting pool.
Works on All Pool Types
- Suitable for chlorine, saltwater, and freshwater pools.
How to Use Drop & Vac Flocculant
1 Adjust Pool Chemistry
- pH should be at 7.8
- Total Alkalinity should be above 100 ppm
2 Turn Off the Pump
- Allow the water to remain still for optimal settling.
3 Broadcast Drop & Vac Over the Pool Surface
- Evenly distribute the granular flocculant across the entire pool area.
4 Wait for 12 24 Hours
- Do not run the pumpallow debris and flocculated particles to settle.
5 Manually Vacuum to Waste
- Use an 8-wheel sweeper to vacuum out settled debris directly to waste (not through the filter).
Recommended Dosage
- Use as needed to clear murky water
- Apply after algae treatment to remove dead algae and debris
- Reapply if necessary for extreme cases of pool contamination
When to Use WaterWell Drop & Vac?
After Heavy Rainfall Helps remove dirt, dust, and organic debris.
After Algae Treatment Binds and settles dead algae for easy removal.
For Cloudy or Murky Water Coagulates fine particles for improved filtration.
Before Pool Opening or Closing Clears seasonal build-up and debris.
Why Choose WaterWell Drop & Vac?
Powerful Flocculant Quickly settles fine particles, debris, and dead algae.
Proven Water Clarity Solution Clears cloudy pools fast, ensuring sparkling results.
Easy to Apply No complicated setupjust apply, wait, and vacuum.
Works on All Pool Types Effective in chlorinated, freshwater, and saltwater pools.
Cost-Effective Reduces the need for excessive filtration and chemical use.
Frequently Asked Questions (FAQs)
Q: How long does it take for WaterWell Drop & Vac to work?
A: 12 24 hoursallowing debris and particles to fully settle before vacuuming.
Q: Do I need to run my pool pump after applying Drop & Vac?
A: Noturn off the pump for optimal settling before vacuuming.
Q: Can I use this in a saltwater pool?
A: Yesit is safe for chlorine, saltwater, and freshwater pools.
Q: What happens if I don't vacuum the settled debris?
A: The debris will remain at the bottom, and swimmers can stir it up again, causing the pool to become cloudy. Vacuuming to waste is essential for best results.
Q: Can I swim after adding Drop & Vac?
A: No, wait until after vacuuming the settled debris before resuming swimming.
