POOL PUMP AND MOTOR QUALITY SUPERFLO PUMP .75KW

The Quality Pumps and Motor 0.75kW is suitable for up to a 60,000 litre pool and is best suited with a 3-bag sand filter. The self-priming pool pump can be installed above or below ground, on a flat surface, away from areas that tend to flood.

INSTALLATION INSTRUCTIONS

The pump is a self-priming pump, which can be installed above or below water level, if you choose to go below, be sure to connect a control valve on your suction pipe between the pool weir/skimmer and the pump, which will prevent your pump being flooded when you open the lid to clean the pump leaf basket.

Do not over tighten fittings into the inlet and outlet of the pump. Position pump on a flat level surface not exposed to flooding, as the pump motor is not waterproof.

Electrical connection should be done by an electrician, be sure to earth the motor. Pump should be installed in a weatherproof and well ventilated enclosure away from all chemicals. Before starting the motor, open the lid of the pump and add water to cover the basket, replace lid and tighten by hand. Never run the pump dry without water, and clean the pump leaf basket regularly.