POOL SAND FILTER SPECK AQUASWIM® 2 BAG (80KG)
The Speck Aquaswim 2 Bag 80kg Sand Filter is a compact swimming pool sand filter built for reliable daily filtration in smaller residential pool systems. It is designed to remove suspended dirt, debris and fine particles from the pool water as part of a correctly installed pump and filtration setup.
This 2 bag model uses a seamless one piece moulded polyethylene tank. The tank has no welded seams or joints, helping improve strength and durability during normal operation. The side mounted multiport valve allows the user to select standard filter functions such as filter, backwash, rinse, waste and closed.
Inside the filter, non corrosive ABS high flow internal components help distribute water through the media bed. The filter also includes an automatic internal air relief system, which helps reduce trapped air inside the tank and supports smoother operation.
The Aquaswim 2 Bag model has a listed filter area of 0.21m², an empty weight of approximately 13.5kg, a media capacity of 80kg, and a maximum flow rating of 9.5m³/h at 80kPa. It is commonly rated for average pools of around 42,000 litres, with supplied suitability guidance up to approximately 57,000 litres when correctly matched to the right pump, pipework and turnover requirement.
This filter is best paired with a suitable 0.45kW or 0.6kW pool pump. Correct pump sizing is important because an oversized pump can push too much water through the filter, while an undersized pump may not circulate the pool effectively.
For best long term performance, replace filter sand every 18 to 24 months under normal pool conditions. If using glass media, replacement is typically around 54 months, depending on water condition, chemical balance, backwashing habits and the manufacturer's media guidance.
FAQs
What is the Speck Aquaswim 2 Bag Sand Filter used for?
The Speck Aquaswim 2 Bag Sand Filter is used to filter swimming pool water by passing it through a sand or glass media bed. It helps remove suspended dirt and debris before the water returns to the pool.
Is this filter suitable for a small pool?
Yes. This is the compact 2 bag model in the Aquaswim filter range and is best suited to smaller residential pool systems when matched with the correct pump.
What is the average pool rating?
The supplied technical information lists an average pool rating of around 42,000 litres. The product information also notes suitability up to approximately 57,000 litres, depending on the pump size, pool plumbing, turnover rate and pool conditions.
What size pump should be used with this filter?
The supplied recommendation is a 0.45kW or 0.6kW pool pump. The correct choice depends on the pool volume, pipe length, suction layout, return lines and whether extra equipment such as solar heating is installed.
Does this filter come with sand?
Filter media is not included unless specifically selected or stated on the product page. This model is listed for 80kg sand capacity or 4 x 15kg ECO CLEAR glass media.
What does the side mount multiport valve do?
The side mount multiport valve controls how water flows through the filter. It allows the user to select common functions such as filter, backwash, rinse, waste and closed.
How often should I backwash this filter?
Backwash when the pressure rises noticeably above the normal clean operating pressure, when water flow slows, or as part of regular pool maintenance. Always switch the pump off before moving the multiport valve handle.
How often must the filter sand be changed?
Under normal pool use, filter sand should generally be changed every 18 to 24 months. Glass media usually lasts longer, with supplied guidance of around 54 months, depending on use and water condition.
What are the dimensions of this filter?
The listed approximate dimensions are 860 x 520 x 590mm.
Is this a carry in warranty product?
Yes. The warranty is handled as a manufacturer carry in warranty under normal operating conditions and correct maintenance.
Key Features and Benefits
Compact 2 Bag Filter Design
The 80kg media capacity makes this filter suitable for smaller residential pool systems where a large filter tank is not required.
Seamless Moulded Tank
The one piece polyethylene tank is made without welded seams or joints, supporting strength and durability during normal use.
Side Mounted Multiport Valve
The side mount valve allows simple operation between filter, backwash, rinse, waste and closed functions.
High Flow ABS Internals
The non corrosive ABS internal components help distribute water through the filter media and support consistent filtration performance.
Automatic Internal Air Relief
The internal air relief system helps reduce trapped air inside the filter tank, supporting smoother operation.
Sand or Glass Media Compatible
This model can be used with traditional silica filter sand or compatible glass filter media, depending on your pool maintenance preference.
Suitable for 0.45kW or 0.6kW Pumps
The supplied pump guidance makes this filter a practical match for smaller residential pool systems.
Real World Applications
This filter is ideal for:
Small to medium residential swimming pools
Splash pools and compact garden pools
Pool owners replacing an old 2 bag side mount sand filter
Systems using 0.45kW or 0.6kW pool pumps
Pools needing a compact filter with simple backwashing
Homeowners wanting a practical sand or glass media filtration option
Technical Specifications
| Specification | Details |
|---|
| Product Type | Side mount swimming pool sand filter |
| Brand | Speck |
| Model | Aquaswim 2 Bag |
| Media Capacity | 80kg sand |
| Glass Media Option | 4 x 15kg ECO CLEAR glass media |
| Filter Area | 0.21m² |
| Tank Size | 20 inch variant |
| Empty Weight | Approximately 13.5kg |
| Average Pool Rating | Approximately 42,000 litres |
| Supplied Suitability Guidance | Up to approximately 57,000 litres, system dependent |
| Maximum Flow Rate | 9.5m³/h at 80kPa |
| Recommended Pump Size | 0.45kW or 0.6kW |
| Valve Type | Side mounted multiport valve |
| Internal Components | Non corrosive ABS high flow internals<... |
