Portable 2 In 1 Digital Auto Brake Fluid and Tire Pressure Tester

Product Description

Brake fluid detection pen is based on the change in conductivity to determine the moisture change brake fluid. It shows clearly the extent of moisture contained by the light-emitting diode, high moisture content will lead to lower boiling point, affect braking performance. Red indicates the brake fluid need to immediate replacement, green represents good condition, yellow indicates the status is acceptable but soon need to replace.

Features:

It is with Digial LCD Detction Display screen.

Heavy pressure is pressure measurement, light pressure is deflation.

Tire pressure protection, Kpa / Psi / Bar pressure units can be selected by switch button.

The tester can check the car brake oil quality and tire pressure test, high precise and portable 2 IN 1 tester.

3 LED lights display the percentage of moisture content in the brake fluid,Testing DOT 3, DOT4, DOT5 brake fluid.

Specifications:

Material: ABS

Product Size: 15.5x2x2.6cm

Battery: 1 x CR1220 button battery (not included).

1.Green LED light:Water content 0%,the tester start normally,The brake fluid performance is good,there is no water in brake fluid.

2.Yellow LED light:Water content<2%,the brake fluid performance is ok,it can be continue to be used.

3.Red LED light:Water content>3%,the brake fluid need to be replace immediately.

Note:

Size may be a little deviation due to manual measurement.

Different displays show the same picture may be slightly differences.

After testing the moisture content of the brake fluid, please clean the metal probe with water to prevent corrosion of the brake fluid.

When measuring tire pressure, the display shows OL indicating that the test pressure range is exceeded. Press the valve at the time of inspection, otherwise it will deflate.

Package include:

1 x Brake Fluid Tire Pressure Tester