Power Supply 45-48 Watt, OPEN FRAME Single Output , 90-250V AC-18VDC, 2.5 amps

90-250V AC to 18V Regulated power supply with kettle plug socket. Single output, 45 to 48 Watt, universal input switching power supplies, Meets international and domestic commercial safety standards, Meets international EMI requirements

SPECIFICATIONS

INPUT
Universal, 90 - 264Vac, 47-63 Hz, single phase.
Inrush current: 1. 30A Max @ 115Vac & cold start 2.
60A Max @ 230Vac & cold start
OUTPUT
Ripple*: 1% p-p of output voltage measured differentially
Max total regulation**: 5%
Max Startup time: 5 s
Holdover: 8 ms minimum
*Ripple voltage measurement is done with an oscilloscope set at 20 MHz bandwidth and output terminated with 0.1 uF ceramic capacitor and 47 uF aluminum capacitor at full load and nominal line
** includes line, load, temperature and set point

EFFICIENCY

78% minimum

PROTECTION

Output short circuit and overload protected
Over voltage protection Auto recovery at 19.8V ~ 23V

LEAKAGE CURRENT

Less than 750uA
MECHANICAL
AC input: #18 AWG wire 90 mm with IEC-320C14 AC inlet (supercom SC-9-1)
DC Output: #18 AWG UL1007 black wire 100 mm with Molex 3069
Dimensions (L x W x H), mm: 120 x 54 x 32
Weight typical, g: 185

ENVIRONMENTAL

Operating temperature: 0 to + 40°C (at full rated output power with natural convection cooling and in non-restricted environment)
Storage temperature: -20 to + 85°C
Operating Humidity: 10 to 90%
Storage Humidity: 5 to 95%
HI-POT TEST

Primary to FG 1500Vac / 1 minute @ 10mA max

EMI COMPLIANCE

FCC part 15J Class B
CISPR 22 (EN 55022) Class B

SAFETY APPROVALS

UL 1950 3rd Edition
cUL
TUV EN 60950