Beautiful & Powerful ASIC X11 - D3 ANTMINER
APW 3++ PSU, Power Cord
& 20 M CAT 5 Network Cable
Brand New - Just Cleared Customs yesterday
Seen Being Un-packed and Bench Tested for the Lucky Owner
Can currently mine 12 different X11 Algorythm Coins
** To be REALLY effective mining X11 coins you need superfast ADSL/ FIBRE connection & low latency **
** Lots of Cooling and Sound Proofing Required **
Unfortunately, my Fixed Wireless Internet is inadequate for mining and Sadly, I am forced to sell my unit
The Green LED on the right , above on the face plate , indicates it is mining and connected to the Mining Pool
This is the latest version 19.3 G/H D3 X11 ASIC Antminer from Bitmain
Complete with Factory recommended APW3++1600 W Power Supply
& 20 M CAT 5 Network Cable
SPECIFICATIONS of ANTMINER D3
a) Hash rate: 19.3 GH/s (Variation of ±5% is expected)
b) Power consumption: 1200W (at the wall, with Bitmain’s APW3 PSU, 93% efficiency, 25°C ambient temp).
c) Dimensions of the miner: 320*130*190mm
d) Hashing algorithm: X11
2. Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter.
3. Bitmain recommends use of the APW3++ PSU with the Antminer D3.
One APW3++ PSU can not power more than one Antminer D3.
4.Arrived December 20, 2017
5. All import duties and VAT paid
6. All PCIe connectors on a hashing board need to be connected to the PSU for the hashboard to operate. Do not connect more than one PSU to the same hashing board!
7. Separate power supply to control board: there is one additional 6pin PCIe connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the PCIE connectors are connected to power supply.
WARRANTY OF D3 ANTMINER
1. A 180-day warranty is provided starting from the shipping date. To avail this warranty a repair ticket must be generated by the customer on Bitmain's website. Overclocking the miner will void the warranty immediately.
2. Defective miners can be repaired for free if they fall under the Bitmain warranty policy. After the warranty period, machines can be repaired at the cost of parts and labor..
4. The following events will void the warranty:
a. Customer removes/replaces any components by himself without receiving permission from Bitmain first;
b. Damage caused by poor power supply, lightning or voltage surges;
c. Burnt parts on hash boards or chips;
d. Miner/boards/components damage due to water immersion or corrosion due to wet environment.
5. For all repairs or RMA, within warranty or not, customer must return the defective parts at his/her own expense after opening a support ticket and troubleshooting with Bitmain's instructions.
6. Bitmain will cover shipping cost when shipping a replacement unit within the warranty period.
