Main centres: | 1-3 business days |
Regional areas: | 3-4 business days |
Remote areas: | 3-5 business days |
INVERTER MODEL | 1.5KW 12V | |
Rated Output Power | 1.5KW | |
Input Voltage Waveform | Sinusoidal (utility or generator) | |
Nominal Input Voltage | 230Vac | |
Output Voltage Waveform | Pure Sine Wave | |
Output Frequency | 50Hz | |
Low Loss Voltage | 170Vac±7V (UPS); 90Vac±7V (Appliances) | |
Low Loss Return Voltage | 180Vac±7V (UPS); | |
100Vac±7V (Appliances) | ||
High Loss Voltage | 280Vac±7V | |
High Loss Return Voltage | 270Vac±7V | |
Max AC Input Voltage | 300Vac | |
Nominal Input Frequency | 50Hz/ 60Hz (Auto-detection) | |
Output Short Circuit Protection | Circuit Breaker | |
Efficiency (Line Mode) | >95% ( Rated R load, battery full charged ) | |
Transfer Time | 10ms typical (UPS); | |
20ms typical (Appliances) | ||
Peak Efficiency | 91% | |
Overload Protection | 5s@ >150% Io ad; 10s@ 110% ~ 150% Io ad | |
Surge Capacity | 2* rated power for 5 seconds | |
Nominal DC Input Voltage | 12Vdc | |
Cold Start Voltage | 11.5Vdc | |
High DC Recovery Voltage | 14.0Vdc | |
High DC Cut-off Voltage | 16.0Vdc | |
No Load Power Consumption | <25W | |
Utility Charging Mode | ||
INVERTER MODEL | 1.5KW 12V | |
Charging Algorithm | 3-Step | |
AC Charging Current (Max) | 60 Amp | |
Bulk Charging Voltage | ||
Flooded Battery | 14.6 | |
AGM / Gel Battery | 14.1 | |
Floating Charging Voltage | 13.5Vdc | |
MPPT Solar Charging Mode | ||
INVERTER MODEL | 1.5KW 12V | |
Max. PV Array Power | 2000W | |
Nominal PV Voltage | 240Vdc | |
PV Array MPPT Voltage Range | 90~430Vdc | |
Max. PV Array Open Circuit Voltage | 450Vdc | |
Max Charging Current (AC charger plus solar charger) | 80Amp | |
INVERTER MODEL | 1.5KW 12V | |
Safety Certification | CE | |
Operating Temperature Range | -10°C to 50°C | |
Storage temperature | -15°C~ 60° C | |
Humidity | 5% to 95% Relative Humidity (Non-condensing) | |
Dimension (D*W* H), mm | 348X270X95 | |
Net Weight, kg |