POWR HIGH HEAT SPRAY PAINT is made of thermoplastic acrylic resin under the advanced petroleum manufacturing techniques. It is easy to use and gives a fine spray when spraying onto surfaces. The advanced formulation provides outstanding resistance to peeling, cracking, chipping and colour fading caused by all weather conditions.
Applications:
POWR HIGH HEAT SPRAY PAINT can be used in spraying and repairing of surfaces such as metal, wood, glass, leather, porcelain, ABS plastic and more.
Features:
- Non-corrosive.
- Fast-drying.
- Rust resistant.
- Contains no CFC's.
- Rust resistant.
- Easy application
- Resistance to peeling, cracking, chipping and colour fading caused by all weather conditions.
Directions for use:
- Clean surfaces thoroughly remove any dirt, grease, rust and loose paint.
- Remove loose paint with a wire brush or sand paper before spraying.
- Shake vigorously until glass agitator (mixing ball) rattles in the can.
- Apply constant pressure on the nozzle while spraying the surface uniformly from a distance of 20-30cm. Keep the can in motion from side to side so that the coating is deposited evenly.
- It is recommended to apply several thin coatings while allowing the paint to dry between coats.
Important: After use, turn can upside down and spray for 3 seconds to clear the valve and prevent clogging. If the valve clogs, pull off the nozzle and rinse in a solvent such as paint thinners.
Storage and Shelf Life:
Store in cool, dry area. Do not expose to open flame. Excessive heat can cause premature aging of components resulting in a shorter shelf life.
POWR HIGH HEAT SPRAY PAINT has a shelf life of 36 months (the expiry date is shown on the packaging), when stored at a temperature between -15°C to 30°C in its original unopened packaging
What's in the box:
1 x POWR Heat Resistant Spray Paint Blue 300ml ( 2 Pack )
