POWR Heat Resistant Spray Paint Red 300ml

POWR HIGH HEAT SPRAY PAINT is made of thermoplastic acrylic resin under the advanced petroleum manufacturing techniques. It is easy to use and gives a fine spray when spraying onto surfaces. The advanced formulation provides outstanding resistance to peeling, cracking, chipping and colour fading caused by all weather conditions.

Applications:

POWR HIGH HEAT SPRAY PAINT can be used in spraying and repairing of surfaces such as metal, wood, glass, leather, porcelain, ABS plastic and more.

Features:

• Non-corrosive.
• Fast-drying.
• Rust resistant.
• Contains no CFC's.
• Rust resistant.
• Easy application
• Resistance to peeling, cracking, chipping and colour fading caused by all weather conditions.

Directions for use:

• Clean surfaces thoroughly remove any dirt, grease, rust and loose paint.
• Remove loose paint with a wire brush or sand paper before spraying.
• Shake vigorously until glass agitator (mixing ball) rattles in the can.
• Apply constant pressure on the nozzle while spraying the surface uniformly from a distance of 20-30cm. Keep the can in motion from side to side so that the coating is deposited evenly.
• It is recommended to apply several thin coatings while allowing the paint to dry between coats.

Important: After use, turn can upside down and spray for 3 seconds to clear the valve and prevent clogging. If the valve clogs, pull off the nozzle and rinse in a solvent such as paint thinners.

Storage and Shelf Life:

Store in cool, dry area. Do not expose to open flame. Excessive heat can cause premature aging of components resulting in a shorter shelf life.

POWR HIGH HEAT SPRAY PAINT has a shelf life of 36 months (the expiry date is shown on the packaging), when stored at a temperature between -15°C to 30°C in its original unopened packaging

What's in the box:

1 x POWR Heat Resistant Spray Paint Red 300ml