Vehicle Fitment & Part Details
This propshaft centre bearing (AR9310, OE 2H0 598 351 B) fits the VW Amarok 2.0 TSi petrol, 2.0 TDi diesel, and 2.0 BiTDi twin-turbo diesel in 4x2 and 4motion 4x4 configurations from 2010-2022. The centre bearing supports smooth rotation of the propshaft between the gearbox and rear differential. Supplied with the rolling bearing and attachment/mounting material. Confirm compatibility by matching the listed fitment details, OEM reference numbers, and VIN/engine/chassis information where variants exist.
Key Details
- SKU
- AR9310
- Component
- Propshaft Centre Bearing
- OEM References
-
- VW: 2H0 598 351 B
- 2H0 598 351 C
- Primary Fitment
- VW Amarok 2.0 TDi / BiTDi / TSi (2010-2022)
Key Benefits
- Supplied complete with attachment/mounting material.
- Integrated rolling ball bearing included.
- Fits both 4x2 and 4motion 4x4 Amarok configurations across the full TDi/BiTDi/TSi range.
Product Specifications
| Specification | Value |
|---|
| Length | 193 mm |
|---|
| Inner Diameter | 30 mm |
|---|
| Hole Spacing | 168 mm |
|---|
| Bearing Type | Ball Bearing |
|---|
| Supplementary Info | With attachment/mounting material, with rolling bearing |
|---|
Vehicle Fitment
| Model | Variant | Engine Code | Power | Years |
|---|
| Amarok (2HA, 2HB, S1B, S6B, S7) | 2.0 TSI 4x2 | CFPA | 118 kW / 160 PS | 12/2010-10/2016 |
| Amarok | 2.0 TDI 4x2 / 4motion | CDBA, CNFA | 90 kW / 122 PS | 09/2010-10/2013 |
| Amarok | 2.0 TDI 4x2 / 4motion | CNFB | 103 kW / 140 PS | 06/2012-05/2022 |
| Amarok | 2.0 BiTDI 4x2 / 4motion | CDCA | 120 kW / 163 PS | 09/2010-08/2012 |
| Amarok | 2.0 BiTDI 4x2 / 4motion | CNEA, CSHA | 132 kW / 180 PS | 11/2011-07/2019 |
| Amarok Platform/Chassis (S1B, S6B, S7B) | 2.0 TDI / 2.0 BiTDI 4x2 / 4motion | CDBA, CNFA, CNFB, CDCA, CNEA, CSHA | 90-132 kW | 09/2010-10/2016 |
Fitment Notes
- Always match OEM reference number(s) and vehicle details before ordering. Confirm exact fitment using VIN, engine code, or chassis number if multiple variants exist.
- Supplier catalogue also lists a 3.0 TDi V6 (DDXC) Amarok fitment - verify against your vehicle's engine code and OE number before ordering if unsure.
Installation / Use / Maintenance Tips
- Mark the propshaft orientation relative to the flanges before removal to preserve balance on reassembly.
- Inspect the propshaft, universal joints, and mounting bracket for wear or damage before fitting the new centre bearing.
- Use the supplied mounting hardware and torque fasteners to the manufacturer's specification.
- After installation, road-test and confirm no abnormal vibration, drone, or driveline noise at cruising speed.
Common Questions
Will this centre bearing fit my VW Amarok?
This part (AR9310) is listed for the 2.0 TSi / 2.0 TDi / 2.0 BiTDi Amarok fitments shown on this page. Confirm by matching the fitment details and OEM number before ordering.
What is included?
The centre bearing rubber mount with the integrated rolling ball bearing and attachment/mounting material.
What OEM part numbers does this cross-reference?
Cross-reference numbers are listed in the Key Details section above. Match at least one to your original part before ordering.
How do I confirm fitment if there are multiple variants?
Use VIN, engine code, and chassis/platform details and compare them to the fitment section above. If unsure, request fitment assistance before ordering.
