Pylontech Console Cable for Battery Monitoring | US2000,... - 2 Meter USB to RJ45 for US3000c-UP5000

Pylontech Console Cable for Battery Monitoring | US2000, US3000a/b, US3000c, UP2500, UP5000

This cable is used to monitor your Pylontech Lithium batteries as below via ICC Solar Software or any battery viewing application up to a total of 9 batteries in parallel. From the product drop down you can choose the cable for your Pylontech model to be either USB to RJ11 or USB to RJ45. Please check if your Pylontech battery has a RJ11 or RJ45 Console port.

Specifications:

• Uses Prolific PL2303 Chipset or CH340 Chipset for USB to RS232 depending on stock we have. If a specific chipset needed please specify it on order or call us before ordering. Uses a custom made cable from RS232 to RJ11 or RJ45 depending on battery config required.
• Supports baud rates up to 1.2M bps.

Sample battery information from Raspberry PI to Pylontech US2000 Batteries using ICC Software:

This cable has been tested and working with http://www.multisibcontrol.net/ software from a Windows PC USB Port to Pylontech Batteries Console Port. It will provide the views below for batteries:

Please note this Cable plugs into your monitoring PC / Raspberry PI USB Port and then to the CONSOLE port of the Pylontech Battery. Other ports such as CAN Bus / RS485 will not work.

This cable is constructed and customized by HDCabling and has been tested on below models :

Tested on RJ11 Console ports used by batteries below such as Pylontech US2000 / US2000b Plus / UP2500 / US3000a & US3000b Batteries. 

Tested on RJ45 Console ports used by batteries below such as Pylontech US3000C, UP2500 & UP5000 Batteries.