RC Car Transmiter Servo Expend Parts 90 To 180 Vehicle Models Parts

Description:

Parameter:

Adaptation voltage 3.6-16V (more than poke with high-voltage servo)

Support 500-2500us 180 degree servo

Board size: 25x9mm

Weight: 7g

One side 3P cable (length 10cm), one side plug design, compact and easy to use

Normally the servo is a 180 degree servo, but the remote control can only make it rotate 90 degrees

principle:

The remote control pwm output is: 1000-2000us; (At this time, the servo can rotate 90 degrees)

This device expands it to 500-2500us, so as to achieve the purpose of rotating 180 degrees

Prerequisite: The servo supports a pulse width of 500-2500us and can rotate 180 degrees

Application occasions:

When you want to use the remote control to expand the angle, such as (robot arm, homemade sailing boat)

Note: Some servos will meet the limit plate when it reaches 180 degrees. Don`t make hard operations to cause the motor to stall.

The reverse of the steering gear is to give the complementary signal of the steering gear, for example, the current is 1500, and the motor is set to the middle position; at this time, the steering gear should be rotated 9 degrees counterclockwise, and the signal of 1600 should be given, but the inverter changes it. 1400, so the steering gear will rotate 9 degrees clockwise.

Please note that this is to extend the angle of the remote control`s servo. Originally, it controlled 90 degrees, but it was expanded to control a 180-degree servo. It does not directly turn a 90-degree steering gear into a 180-degree. This is an important point.

Package Included:

1X?Servo expend parts