RC Motor and ESC Combo
Check my rate
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Product information
Park 300 and 10A Speed Control including X2 new Props (GWS EP-7060 AND GWS EP-6030)
SPECS
Turnigy Park300 Brushless Outrunner 1380kv
Designed to provide reliable and clean power for 3D parkflyers. This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 77 watts brushless outrunner.
Spec.
Battery: 2~3 Cell /7.4~11.1V
RPM: 1380kv
Max current: 7A
No load current: 8V/0.4A
Current capacity: 9A/15sec
Internal resistance: 0.33 ohm
Weight: 24g (not including connectors)
Diameter of shaft: 3mm
Dimensions: 37x28mm
Required;
10A ESC
2S~3S Li-Po / 6 ~ 8-cell Ni-MH/Ni-Cd
6x5 ~ 8x3.8 prop
Suitable for sport and scale airplanes weighing 8 to 12 ounces (225g340g).
ESC
TURNIGY Plush 10amp 9gram Speed Controller
Cont Current: 10A
Burst Current: 12A
BEC Mode: Linear
BEC : 5v / 2A
Lipo Cells: 2-4
NiMH : 5-12
Weight: 9g