Rear View Parking Sensor (Complete DIY Kit) - C47
Check my rate
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Product details
Rear View Parking Sensor (Complete DIY Kit)
Rear View Parking Sensor - makes reverse maneuvering save and easy. This complete DIY kit comes with sensors that utilize cutting-edge ultrasonic detection technology to notify the driver of the distance and position of obstacles by means of an acoustic beep, voice, or virtual display.
This brilliant device uses ultrasonic technology to measure distance in real time and send an audible alert that increases in urgency as you come closer to an object. Along with color-coding, you are sure to park your car with perfect precision every time. From 1 meter and further away, the screen is blue and there is no noise. If an object is .7 to 1 meter, it repeats "attention" and the screen turns purple. If there is an object within .6 meters it turns red and says "warning". Under .3m it says "stop". This is the ideal safety device for backing up, parallel parking, garage parking, and parking in tight areas where the risk of damaging your car is much higher.
This high quality waterproof rear view parking sensor is an easy DIY (do-it-yourself) unit that makes a great upgrade to any vehicle. The sensors have been specifically designed to blend in perfectly with your vehicle bumper and can be installed on all of today's big and small cars without the need for any extra parts.
At a Glance...
- Reversing and parking made easy
- Voice alert, beep alert, or just by color
- Easy DIY installation - works in any vehicle
- Waterproof - works in the rain or snow
Manufacturer Specifications
- Number of sensor: 4; 2 for rear-left, 2 for rear-right
- Alert Type: Voice or beep
- Display: 2.8 Inch LCD
- Operating voltage: 10.8-15V
- Max. Consumption: 2W
- Operating temperature: -40 ~ +80
- Buzzer volume: About 80db
- Alert range: 0 to 2m
- Dimensions - Sensor cable length: 230 inches
- Dimensions - Sensor hole diameter: 22.5mm
- Dimensions - Display: 85mm x 50mm x 19mm
- Dimensions - System Box: 89mm x 63mm x 19mm
Product Notes
- Parking sensor will automatically start when the vehicle is reversing.
- Easy DIY installation, also no need for maintenance
- Precise detection up to 0.01m
- Color and Voice alert (Normal - Blue/Attention - Purple/ Warning - Red/ Stop - Red)
- All weather design (-40 to +80 degrees Celsius)
- Does not run on battery power when the vehicle is parked and engine is switched off
- Instruction manual with installation illustrations and tips
Package Contents
- Command Module, Ultrasonic Parking Sensor x4, Acoustic Indicator, Power Supply Cable, Mounting Accessory Kit, Hole Saw, Instruction Manual - English
Frequently Asked Questions
- Will the C47 reverse parking sensor work in my specific make and model of car?
Yes, the C47 sensors were designed to fit in perfectly with any vehicle. - Where should I install these parking sensors?
Perfect installation relies on two factors: Position and angle. Both are extensively covered in the user manual, don't worry! - Will these parking sensors work in front of the car?
Sure! Even though the C47 was designed to be used in the rear of your car, you can still install the sensor on the front and it will still read distance. However, the pictures on the LCD indicator will not update, however, and it will still assume that the camera is on the back of the car (which won't really affect anything though). - Some products will be shipped from Asia if they are not in stock in our warehouse in SA. In this case delivery to you will take between 6 and 12 days. You will be informed of the stock/delivery situation when you have placed an order. Please note that the price you see here is the price you pay. WE pay the Import duties, VAT, Delivery cost to SA etcIMPORTANT NOTICE: NO CREDIT CARD PAYMENTS FROM BUYERS WITH LESS THAN 10 POSITIVE RATINGS WILL BE ACCEPTED!!(PLEASE CONFIRM STOCK AVAILABILITY PRIOR TO PLACING THE ORDER)