Vehicle Fitment & Part Details
Reverse Light Switch for the Volkswagen Golf 1 and Volkswagen Jetta 2, listed for 17 applications in total, with a 5-pin connector. Confirm compatibility by matching the listed fitment details. Verify VIN/engine.
Key Details
- SKU
- 102938
- Component
- Reverse Light Switch
- Primary Fitment
- Volkswagen Golf 1 17 (1974-1984)
- Specs
- Pin Count: 5
Listing Highlights
- Listed for the selected applications shown in the fitment section below.
- Useful for matching by SKU, pin count (5-pin) and original part comparison.
Product Specifications
| Specification | Value |
|---|
| Pin Count | 5 |
|---|
Vehicle Fitment
This reverse light switch is listed for 17 applications: Volkswagen Golf 1 (17), Golf 1 Cabriolet (155), Golf 2 (19E, 1G1), Jetta 1 (16) and Jetta 2 (19E, 1G2, 165), with supplied year coverage from 1974 to 1993. Use the full table below to confirm model, chassis, year range, engine and power before ordering.
View Full Vehicle Fitment (17 applications)
| Model | Chassis | Years | Engine | Power |
|---|
| Golf I | 17 | 1974-1984 | 1.1 (FA, GG) | 37 kW |
|---|
| Golf I | 17 | 1974-1984 | 1.3 (GF) | 44 kW |
|---|
| Golf I | 17 | 1974-1984 | 1.5 (JB) | 51 kW |
|---|
| Golf I | 17 | 1974-1984 | 1.5 D (CK) | 37 kW |
|---|
| Golf I | 17 | 1974-1984 | 1.6 (FP) | 55 kW |
|---|
| Golf I | 17 | 1974-1984 | 1.6 D (CR, JK) | 40 kW |
|---|
| Golf I | 17 | 1974-1984 | 1.8 GTI (DX) | 82 kW |
|---|
| Golf I Cabriolet | 155 | 1982-1993 | 1.8 (DX, EV, KT, PB) | 82 kW |
|---|
| Golf II | 19E, 1G1 | 1983-1992 | 1.8 (GU, GX, HV) | 66 kW |
|---|
| Golf II | 19E, 1G1 | 1983-1992 | 1.8 GTI (DX, EV, PB) | 82 kW |
|---|
| Golf II | 19E, 1G1 | 1983-1992 | 1.8 GTI 16V (KR) | 102 kW |
|---|
| Jetta I | 16 | 1980-1985 | 1.3 (GF) | 44 kW |
|---|
| Jetta II | 19E, 1G2, 165 | 1984-1992 | 1.6 (ABN, EZ, HM) | 55 kW |
|---|
| Jetta II | 19E, 1G2, 165 | 1984-1992 | 1.6 (PN) | 51 kW |
|---|
| Jetta II | 19E, 1G2, 165 | 1984-1992 | 1.8 (EV, PB) | 82 kW |
|---|
| Jetta II | 19E, 1G2, 165 | 1984-1992 | 1.8 (GU, GX, HV) | 66 kW |
|---|
| Jetta II | 19E, 1G2, 165 | 1984-1992 | 1.8 16V (KR) | 102 kW |
|---|
Fitment Notes
- Always match vehicle details before ordering. Verify VIN/engine.
Professional Fitment Required: Electronic, electrical, and electromechanical components require correct identification before installation. Compare the new unit to the removed unit and verify mounting orientation, terminal or connector type, pin count or terminal arrangement, voltage rating, polarity, and any pulley or bracket configuration where applicable. Incorrect installation, polarity reversal, water or moisture ingress, improper connector seating, or mismatched specifications can damage the component, related ECU systems, or cause persistent fault codes. Installation by a qualified, VAT-registered workshop with appropriate diagnostic equipment is recommended.
Returns Notice: Once an electronic, electrical, or electromechanical component has been fitted, plugged in, energised, or shows signs of installation, returns are limited to manufacturing defect only. Confirm part compatibility before opening sealed packaging.
Compatibility Verification Notes
- Confirm compatibility using VIN, engine code, chassis / platform, original part comparison and any listed reference numbers before ordering.
- Match the supplied fitment details to your vehicle, including model, year range and any listed engine or chassis information.
- Confirm connector type and pin count (5-pin) against the original unit before ordering.
- Fitment data may vary by production date, market, import history and engine variant.
- This listing is for part identification and compatibility checking only. Installation must be carried out according to the vehicle manufacturer's service information by a suitably qualified person.
Common Questions
Will this reverse light switch fit my Volkswagen Golf 1?
This part (102938) is listed for the fitments shown on this page. Confirm by matching the fitment details. Verify VIN/engine.
How do I know the 5-pin version is the right one?
Count the pins on your original unit's connector and compare the connector shape before ordering. This listing is the 5-pin version.
How do I confirm fitment if there are multiple variants?
Compare the supplied fitment details, reference numbers, original part details and any listed variant information before ordering. Verify VIN/engine.
