RF TVLink Modulator - AV to RF Converter with IR Extender
46 were available / new
R489.00
0% off
Shipping
R35.00 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30.00 surcharge. This will be calculated at checkout if applicable. Check my rate
The seller has indicated that they will usually have this item
ready to ship within 3 business days.
Shipping time depends on your delivery address.
The most accurate delivery time will be calculated at checkout,
but in general, the following shipping times apply:
RF TVLink Modulator - AV to RF Converter with IR Extender - Control DSTV / Multichoice Decoder Explora 3 from remote room
This RF TV Link Modulator is used to enable you to change channels from a remote room. For installation examples please refer to the DSTV Installation Diagrams & User Bands page for more information on installation.
Functions
Designed for Multichoice DSD 5U/5S Decoders / Explora 3 and Newer Models without RF Ports
Powered from Decoder
TV link Functionality to control Decoder from Remote Location - See TV Links product below if you do not have a current TV Link Eye on far end
4 Pre-set RF Channels
Slim Compact Design
PAL I/PAL DK/PAL BG
TV Format: PAL
Sound Carrier Frequency: 4.5/5.5/60./6.5Mhz
Remotor Distance: 10m
Transm9itter Distance: 20cm
Remote Control Frequency: 35KHz
Power: USB 5 Volt
RF Frequency Points
471.25MHz (Channel 21)
519.25MHz (Channel 27)
623.25MHz (Channel 40)
783.25MHz (channel 60)
RF Output Impedance
75OHM Unbalanced
Package Contents
RF Modulator
Emitter IR Cable (Plugged into RF Modulator and attached to Decoder as per below pictures for various models). NOTE!! Far end TVLink NOT Included, Link below to TV Links
Micro USB Power Cable - Attach to USB port on Decoder or HDTV for Powering the RF Modulator
Power Cable
Please see below TV Links that can be used with this RF Modulator if multiple rooms need to be controlled. You will need one TV Link if one room to be controlled from Far end. For a Detailed diagram on different setups please see diagrams at DSTV Xtraview & Frequencies
The IR Emitter from RF Modulator has different locations to be placed on different decoders see below Yellow Dot PlacementExplora 2Explora 3ADSTV HD Decoder Model 5sDSTV HD Decoder Model 6sThis RF TVLink Modulator is used with DSTv Decoders without RF Ports such as the decoders below to change channels from a remote location