RFID Copier 125KHz 13.56MHz Card Reader Dual Frequency Duplicator Reader Writer DESCRIPTION Feature: Support IC/ID dual frequency replication. Driver-free, no need to download software installation. Two-color LED light prompt (red light is standby, green is working). Built-in buzzer "beep" sound reminder Working frequency: ID125KHz, 250KHz, 375KHz, 500KHz, 625KHz, 750KHz, 875KHz, 1000KHz. IC 13.56MHz frequency. Support card type: For 125KHz ID type: EM4100, TK4100, 8800, 5200, EM4305, T5577, 8265 etc. For 13.56MHz IC type: UID FUID CUID UFUID, Most of IC Half-encryption, IC Full-encryption etc. How to use the card reader? 1) Connect the device to your computer with the USB cable. 2) You can view and open the software on your computer. Read and write ordinary 125KHz for RFID card 1) Set "LF Card" interface. 2) Put the card on the device and press "Read" on the software to scan the card. 3) The software will scan and display the card number. 4) Put the writable T5577 (125KHz writable chip) key cards on the device, and press "Write" on the software. Read and write 13.56MHz IC, IC half encryption card, IC full encryption card 1) Set "HF Card" interface. 2) Put the card on the device and press "Card Number" on the software to scan the card. 3) Put the UID type key cards (13.56MHz writable chip) on the device, and press "Write card" on the software. Decode NFC mobile phone or NFC smart band PhoneWalletSwipe CardAdd NowChoose the Type of AddKeySimulate a physical for access card, the encryption card is a simulation failure 1) Put the encryption card on the reader --- start decoding --- save data as another --- save the data to the folder 2) Put the UID card on the reader --- Write UID card --- format 3) Use UID card to simulate physical for access card on mobile phone After the simulation is successful, click the card cover and show success 4) Put the phone on the reader --- Start decoding --- format --- Import data (encrypted card data) --- Write ordinary MF1K card Specification: Dimensions: 96 (L) X 65 (W) X 15 mm (H) Interface: USB full speed Working Voltage: 5V DC Working current: 200mA Standby current: 50mA Normal current: 100mA Package Included: 1* for RFID Copier
