Specification:
*Size of controller: 89mm x 55mm x 44mm
*Power voltage: AC220V
*Power consumption: less than 2W
*Limited running time of relay output 1: 0 to 720 minutes settable via App. Each setting progresses is 5 minutes, 0, 5, 10, 15, .............710, 715, 720
*Time delay setting of relay output 1: 0 to 30 seconds settable via App.
*Relay outputs: two relay outputsnormal open
The contact current capacity is 10A for resistive load and 2A for inductive load. It can control 2000W resistive load or 500W motor /water pump. Larger loads require AC contactor expansion.
*Working environment: -10 to 50
*WIFI 2.4GHZ b/g/n, not support 5G WIFI.
Main Features:
1. Real-Time Supervision: APP can display the current water level,
2. Turn on/off equipment (relay 1) remotely via App. Users can also control it on/off by manual switch button B.
3. Two relay outputs: Relay 1 control water level, Relay 2 for dry heating protection.
4. Preset"Add water" or "Pump water" working mode, can auto turn on/off relay 1 when it reaches to the preset water level value.
5. Set upper and Lower limit value of water level alarm via APP, real-time push alarm notification to users' smartphone.
6. Can set relay 1 running or delay working time.
Package included:
1 x English manual instruction
1 x wifi water level controller
5 x water level sensors with different cable lenth.
Remark:
White cable: 3.5 meters
Red cable: 3.1 meters
Yellow cable: 2.3 meters
Green cable: 1.1 meters
Blue cable: 1 meter