Vehicle Fitment & Part Details
Roller rocker arm for Jeep Cherokee (KJ) 2.5 CRD 4x4 ENJ diesel, OE 05066780AA. Cross-references cover the Cherokee KJ 2.5/2.8 CRD, Dodge Nitro 2.8 CRD, and Chrysler Voyager IV 2.5/2.8 CRD range all sharing the same DOHC valvetrain. Confirm compatibility by matching the listed fitment details, OEM reference number, and VIN/engine information where variants exist.
Key Details
- SKU
- MAP-101018
- Component
- Roller Rocker Arm
- OEM References
-
- 05066780AA (shared across Chrysler, Dodge, Jeep)
- Primary Fitment
- Jeep Cherokee (KJ) 2.5 CRD 4x4 ENJ 105kW (09/2001-01/2008)
- Specs
- 58mm long x 17mm wide
Product Specifications
| Specification | Value |
|---|
| Length | 58 mm |
|---|
| Width | 17 mm |
|---|
Vehicle Fitment
| Make | Model | Variant | Engine | Years | Power |
|---|
| Jeep | Cherokee (KJ) | 2.5 CRD 4x4 | R 425 DOHC / ENJ | 09/2001-01/2008 | 105kW/143PS |
| Jeep | Cherokee (KJ) | 2.8 CRD 4x4 | ENR | 11/2002-01/2008 | 110kW/150PS |
| Jeep | Cherokee (KJ) | 2.8 CRD 4x4 | ENR | 11/2004-01/2008 | 120kW/163PS |
| Dodge | Nitro | 2.8 CRD 4WD | ENR / ENS | 06/2007-12/2012 | 130kW/177PS |
| Dodge | Nitro | 2.8 CRD | ENR / ENS | 06/2007-12/2012 | 130kW/177PS |
| Chrysler | Voyager IV (RG, RS) | 2.5 CRD | EDK | 08/2005-12/2008 | 88kW/120PS |
| Chrysler | Voyager IV (RG, RS) | 2.8 CRD | ENR | 06/2004-12/2008 | 110kW/150PS |
Fitment Notes
- Always match OEM reference number(s) and vehicle details before ordering. Confirm exact fitment using VIN, engine code, or chassis number if multiple variants exist.
- The matching cam follower (hydraulic lash adjuster / lifter) for this rocker arm is SY-K233 order both together if both are being replaced as a set.
- Sold individually count rocker arms per cylinder head before ordering. The 2.5/2.8 CRD DOHC engines use multiple rocker arms per cylinder.
- Chrysler, Dodge, and Jeep all use the same Stellantis part number (05066780AA) the rocker arm is identical across all three marques.
Installation / Use / Maintenance Tips
- Rocker arm replacement must be carried out by a qualified workshop with the correct service manual incorrect assembly or torque can cause valve damage or oil starvation.
- Inspect the camshaft lobes and the matching cam followers (SY-K233) at the same time a worn rocker arm often indicates wear elsewhere in the valvetrain.
- Pre-lubricate the new rocker arm and roller bearing with clean engine oil before fitting.
- Tighten all valve cover bolts and rocker shaft fasteners to the manufacturer's torque specification in the correct sequence.
- Check oil pressure at idle and operating speed after assembly; abnormal lifter tick or noise indicates a follower or oil supply issue that must be resolved before extended running.
Common Questions
Will this roller rocker arm fit my Jeep Cherokee, Dodge Nitro or Chrysler Voyager?
This part (MAP-101018) is listed for the fitments shown on this page. Confirm by matching the engine code (ENJ, ENR, ENS, or EDK) and verifying VIN/engine information before ordering.
What cam follower goes with this rocker arm?
The matching cam follower (hydraulic lifter) is SY-K233. If both the rocker arm and the follower are being replaced, order both parts together.
What OEM part number does this cross-reference?
OE 05066780AA. This is a shared Stellantis part number used across Chrysler, Dodge, and Jeep applications the rocker arm is identical regardless of marque.
How many rocker arms do I need per engine?
The 2.5 / 2.8 CRD DOHC engines use multiple rocker arms per cylinder. Count the rocker arms on your engine before ordering sold individually.
How do I confirm fitment if there are multiple variants?
Use VIN, engine code, and chassis/platform details and compare them to the fitment section above. If unsure, request fitment assistance before ordering.
