Safety LCD Digital Tire Pressure Tester Tyre Gauge Car Diagnostic Tool

Safety LCD Digital Tire Pressure Tester Tyre Gauge Car Diagnostic Tool

Product details: 

Tire tread depth gauge 

Range: 0 to 1 inch 

Minimum Increment: 1/32 inch 

Valve cores 

Material: plastic 

Digital tire pressure gauge 

Minimum Increment: 0.5 PSI 

Range:2-100PSI/0.15-7Bar/0.15-7Kgf/cm2 / 15-700 Kpa 

Display:8.3 x 4 Inches LCD display 

Power:3V Lithium coin cell Included 

Operating Temperature: -5~50°C / 23~122°F LCD backlit display

Using Instructions 

Tire tread depth gauge 

1.Push the measuring scale into the gauge as far as it will go 

2.Place the probe into the center of a circumferential tire groove and push down on the gauges base 

3.Carefully remove gauge by holding its barrel (without touching the probe) and confirm the tread depth reading 

4.Place the probe into additional locations around the central circumferential tire groove at least 15 inches apart

Digital tire pressure gauge 

1. Press theON/UNIT/OFFbutton. Wait for the gauge to display zero on the LCD screen 

2. Place the nozzle of the gauge on the tire valve. Press firmly to ensure a good seal and prevent air escaping 

3. Hold gauge on the valve until the threading on the LCD display locks. Remove the gauge to easily see the pressure reading 

4. To retake the pressure, repeat the previous steps 

5. Tire gauge will automatically shut off shortly after use. Gauge can be manually turned off by holding the ON button down for more than 3 seconds