Sata 3 Pci Express Expansion Card Pci-e Sata Controller for Hdd Ssd

Ports: 8 SATA 6GB/s PortsCompliant with PCI-E Specification V2.0 and backward compatible with PCI-E 1.X; Supports Native Command Queuing (NCQ); Compatible with SATA 6G, 3G and 1.5G Hard drivesCompliant with PCI-E Specification v2.0 and backward compatible with PCI-E v1.x; PCI Express x1 Interface, and Compatible with PCI Express x1, x2, x4, x8 and x16 SlotsMarvell 88SE9215+JMicron JMB5xx chipset; Supports 10TB hard disk drives; Non-RAID standard SATA controller; System Requirements:Windows 10/8.1/8/7(32/64bit)/XP/Linux; Interface:PCI Express x1 interface. Compatible with PCI-E X1,X4,X8,X16 SlotsDriver Installation: for Windows XP/Vista/7/8/10(32/64 bit): 1. Insert the companion drive CD into the CD drive; 2. Open My Computer, find the location of the disc, open the disc; 3. Locate the CD:/ SATA CARD/Marvell/9215/drvsetup inside the .exe driver file; 4. Then follow the instructions of the computer to complete the installation, then restart the computerInstallation instructions: 1:Please clean the gold finger of SATA3.0 card by eraser, Plug the SATA cable of the chassis into the card. then connect all the hard disks.2:Turn off the power of the computer and open the back cover of the PC; Remove the bars corresponding to the free slot on the chassis.3:Insert the expansion card into the corresponding PCI-E expansion slot of the host. 4:Secure the iron strip of the expansion card to the chassis with a screwdriver. 5:Close the chassis and plug in the power cord to boot. After entering the system, install the driverCheck the installation: Suitable for PCI-E card with Marvell 88SE9215+JMicron JMB5xx Chipset: Open the Device Manager, expand the Universal Serial Bus Controller option, if there is Marvell 92xx SATA 6G Controller, the hardware and driver are installed successfully; if there is unknown device or other information, the hardware or The driver did not install successfully. If there is Standard SATA AHCI Controller hardware information under Device Manager or IDE ATA/ATAPI Controller, that means the driver didn't installed under windows10.Card layoutcolour: blackMaterial: PCB+metalPackage Contents:1 x SATA 3.0 Expansion Card1 x Low Profile BracketOnly the above package content, other products are not included.Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.