| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
The Crankshaft Position Sensor is listed for the vehicle applications below. Confirm compatibility by matching the listed fitment details and any OEM reference numbers supplied. Verify VIN/engine.
| Specification | Value |
|---|---|
| Pins | 3-pin |
This crankshaft position sensor is listed for 23 applications across Audi, Volkswagen. Use the full table below to confirm model, chassis, year range, engine and power before ordering.
View Full Vehicle Fitment (23 applications)| Make | Model | Chassis | Years | Engine | Power |
|---|---|---|---|---|---|
| Audi | A4 / S4 B6 | 8E2 | 2001-2005 | 1.8 T (BEX) | 140 kW / 190 HP |
| Audi | A4 / S4 B6 | 8E2 | 2001-2005 | 1.8 T (BFB) | 120 kW / 163 HP |
| Audi | A4 / S4 B6 | 8E2 | 2001-2005 | 2.0 (ALT) | 96 kW / 130 HP |
| Audi | A4 / S4 B6 | 8E2 | 2001-2005 | 2.5 TDI quattro (AKE, BAU, BDH) | 132 kW / 180 HP |
| Audi | A4 / S4 B6 Avant | 8E5 | 2002-2005 | 1.8 T (BEX) | 140 kW / 190 HP |
| Audi | A4 / S4 B6 Avant | 8E5 | 2002-2005 | 1.8 T (BFB) | 120 kW / 163 HP |
| Audi | A4 / S4 B6 Avant | 8E5 | 2002-2005 | 2.5 TDI quattro (AKE, BAU, BDH) | 132 kW / 180 HP |
| Audi | A4 / S4 B7 | 8EC | 2005-2009 | 1.8 T (BFB) | 120 kW / 163 HP |
| Audi | A4 / S4 B7 | 8EC | 2005-2009 | 2.0 (ALT) | 96 kW / 130 HP |
| Audi | A4 / S4 B7 Avant | 8ED | 2005-2008 | 1.8 T (BFB) | 120 kW / 163 HP |
| Audi | A4 / S4 B7 Avant | 8ED | 2005-2008 | 2.0 (ALT) | 96 kW / 130 HP |
| Audi | A4 B5 | 8D2 | 1995-2001 | 1.8 T (AEB, ANB, APU, ARK, AWT) | 110 kW / 150 HP |
| Audi | A4 B5 | 8D2 | 1995-2001 | 2.5 TDI (AFB, AKN) | 110 kW / 150 HP |
| Audi | A4 B5 Avant | 8D5 | 1997-2001 | 1.8 T (AEB, ANB, APU, ARK, AWT) | 110 kW / 150 HP |
| Audi | A6 / S6 C5 | 4B2, 4B4 | 1997-2004 | 1.8 T (AEB, ANB, APU, ARK, AWT) | 110 kW / 150 HP |
| Audi | A6 / S6 C5 | 4B2, 4B4 | 1997-2004 | 2.5 TDI (BCZ, BDG, BFC) | 120 kW / 163 HP |
| Audi | A6 / S6 C5 Avant | 4B5, 4B6 | 1998-2006 | 2.5 TDI (BCZ, BDG, BFC) | 120 kW / 163 HP |
| Audi | A6 / S6 C5 Avant | 4B5, 4B6 | 1998-2006 | 2.5 TDI Allroad quattro (AKE, BAU, BDH) | 132 kW / 180 HP |
| Audi | A6 / S6 C6 | 4F2 | 2004-2011 | 2.7 TDI (BPP) | 132 kW / 180 HP |
| Volkswagen | GOLF IV | 1J1 | 1997-2007 | 2.3 V5 (AGZ) | 110 kW / 150 HP |
| Volkswagen | JETTA IV | 1J2, 9M2 | 1999-2006 | 2.3 V5 (AGZ) | 110 kW / 150 HP |
| Volkswagen | PASSAT B5.5 | 3B3 | 2000-2005 | 1.8 T 20V (AWT) | 110 kW / 150 HP |
| Volkswagen | PASSAT B5.5 | 3B3 | 2000-2005 | 2.3 V5 (AZX) | 125 kW / 170 HP |
Professional Fitment Required: Electronic, electrical, and electromechanical components require correct identification before installation. Compare the new unit to the removed unit and verify mounting orientation, terminal or connector type, pin count or terminal arrangement, voltage rating, polarity, and any pulley or bracket configuration where applicable. Incorrect installation, polarity reversal, water or moisture ingress, improper connector seating, or mismatched specifications can damage the component, related ECU systems, or cause persistent fault codes. Installation by a qualified, VAT-registered workshop with appropriate diagnostic equipment is recommended.
Returns Notice: Once an electronic, electrical,...
