Sensor Motion PIR Module HC-SR501 **LOCAL STOCK**
Check my rate
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Product information
Sensor PIR Module HC-SR501:
| Free combined shipping for additional orders placed in our other store "LED SELECT" https://bidorbuy.co.za/seller/434337 |
Specifications:
Input Voltage: 5-20V DC
Static Power Consumption: <50µA
Digital Output Level: High 3.3V, Low 0V
Delay Time: Adjustable (0.5 - 18 sec)
The Embargo Time: 0.2 seconds
Trigger Mode: l not repeatable, h can be repeated, the default value for h
Induction Range: 3-7 meters, 100 degree cone angle
Operating Temperature: -15 to +70 Degrees Celsius
PCB Dimensions: 32 x 24mm, Screw hole Distance 28mm, Screw Diameter 2mm
Sensor Lens Dimensions: 23mm (Diameter)
Features:
PIR sensors are often referred to as "Passive Infrared" or "IR motion" sensors which have the ability to sense motion. Everything emits a small amount of infrared radiation (IR), and the hotter something is, the more radiation it emits. PIR sensors are able to detect a change in average IR levels of their detection zone e.g. when a human enters a room.
This unit runs on 5V-20V power input or 3V by bypassing the regulator with a tiny bit of soldering and has a digital signal output of 3.3V high, 0V low.It can also be powered via Raspberry Pi's 5V output, and be read directly from the Raspberry Pi's GPIO input as the sensor has a digital 3.3V output.
* This module will need to to be assembled with a few other components in order to work correctly. Some electrical knowledge is required. Please research before buying
Please see all our listings here:
https://www.bidorbuy.co.za/seller/4397469