The Shure Performance Gear Dual PG58 wireless system is the perfect introduction to our wireless portfolio. This package comprises two PG2 handheld transmitters with PG58 microphone heads and a PG88 diversity receiver.
FAST AND EASY SETUP, EVEN FOR A BEGINNER
Simply press the channel button on the front of receiver and choose one of 10 available channels. A seven-segment LED indicates instantly if the selected channel is available. Once this is done, choose the same on the transmitter, and you are ready to go.
HOW MANY MUSICIANS CAN USE THIS SYSTEM SIMULTANEOUSLY?
Up to four musicians can use Performance Gear Wireless systems at the same time. One wireless system consists of one transmitter and one receiver, so at a maximum you can run two dual receiver systems simultaneously.
WHY INTERNAL ANTENNAS?
For ideal signal strength, antennas on a wireless system need to be setup in a certain way. The internal antennas on Performance Gear Wireless systems are already set in this ideal way, offering up to 75 m operating range and optimal signal strength.
Additionally internal antennas cannot be broken during setup, use or transport.
Features
Hassle free setup
Internal antennas simplify operation and storage
Only one channel select button
A seven-segment LED indicated instantly if the selected channel is occupied
Reliable wireless technology
Microprocessor controlled Predictive Diversity
10 selectable frequencies
Up to 4 compatible systems per band
Shure standard ruggedness
80 years of microphone expertise
Specs
SYSTEM TECHNICAL SPECIFICATIONS
Compatible systems per frequency band (up to): 4
Selectable frequencies: 10
Auto Setup Features: No
Audio Reference Companding: No
Included Antennas: Internal 1/4-wave
Antenna Options: No
Receiver Network Ability: No
PC Control: No
Rack Hardware: Optional (URT)
Case: Optional System Case
Transmitter Display: Multi-color LED
Receiver Display: Multi-color LED
Battery, Endurance: 9V, >8 h
Environment: Small to medium stages
FURTHER TECHNICAL SPECS
PG88 Dual Receiver
Output Impedance XLR connector: 200 ¿¿ 1/4 inch connector: 1k¿¿
Audio Output Level Ref.
+/¿¿¿ 33 kHz deviation with
1 kHz tone
XLR connector (into 100K ¿¿ load): ¿¿¿19 dBV, typical
1/4 inch connector (into 100K ¿¿ load): ¿¿¿5 dBV, typical
Sensitivity ¿¿¿105 dBm for 12 dB SINAD, typical
Image Rejection >50 dB, typical
Dimensions 188 mm L x 103 mm W x 40 mm D (7.4 in. x 4.0 in. x 1.5 in.)
Dimensions - PG88 388 mm L x 116 mm W x 40 mm D (15.3 in. x 4 in. x 1.5 in.)
Weight 241 grams (8.5 oz)
Weight - PG88 429 grams (15.1 oz)
Housing Molded ABS
Power Requirements 12¿¿¿18 Vdc at 160 mA (PG4), 320mA (PG88), supplied by external power supply
PG1 Bodypack Transmitter
Audio Input Level
-10 dBV maximum at "mic" gain position
+10 dBV maximum at 0dB gain position
+20 dBV maximum at -10dB gain position
Gain Adjustment Range 30 dB
Input Impedance 1m¿¿
RF Transmitter Output 10 mW typical (dependent on applicable country regulations)
Dimensions 110 mm H x 64 mm W x 21 mm D (4.3 x 2.5 x 0.8 in.)
Weight 75 grams (2.6 oz.) without battery
Housing Molded ABS
Power Requirements One 9V alkaline or rechargeable battery
Battery Life Up to 8 hours (alkaline)
PG2 Handheld Transmitter
Audio Input Level
+2 dBV maximum at -10dB position
-8 dBV maximum at 0dB position
Gain Adjustment Range 10dB
RF Transmitter Output 10 mW typical (dependent on applicable country regulations)
Dimensions 223.52 mm L x 53.34 mm Dia. (8.8 in. x 2.10 in.)
Weight 218 grams (7.7 oz.) without battery
Housing Molded ABS handle and battery cup
Power Requirements One 9V alkaline or rechargeable battery
Battery Life Up to 8 hours (alkaline)
