Silver Fpv 2 Axle Brushless Gimbal with Controller for Phantom

Upgrade to high-quality brushless PTZ control panel, chips are original chip, increase the supply anti-reverse polarity protection, counter-power to prevent customers from unintentional indirect cause significant damageOriginal sensor chip, better accuracy, and change the sensor interface, the connection is more solid, easy to loose, iic error does not occur;Upgrade the roof, increasing the head hook hole, easy to use PTZ hookYou can use the remote real-time control of pitch and roll angleExtended function: to set flip, installed on fixed wing;Handheld PTZ can be changed; (user to modify, we does not provide technical support) can be upgraded to three PTZ (user to modify, we does not provide technical support).Name: CNC metal brushless gimbalControl Panel: BGC3.0 Brushless control panelSoftware: BGC2.2Strap: for camera strapCompatible camera: for 3 3+ 4Battery plug type: JST plug \/ XH-2.54 plugVoltage: 12V\/3cell Lipo batteryCompatible model: for phantom I, II and other DIY dronesHow to install:1. Remove the damping balls, open the top cover of the mounting plate.2. Install the top cover of the mounting plate to the bottom of the phantom.3. Install the damping balls.4. Install your camera,and fasten it with strapscolour:SilverMaterial:metalsize:20*18*12cmPackage Contents:1 x brushless PTZ control panel(with some screws)1 x cable1 x blue Camera TiesNotes:1. Recommended power supply for the gimbal is 12V. (3cell lipo battery)2. The camera must fasten on the gimbal. (Not any loose, this is very important)3. Adjust the camera left or right, let the camera almost at level.4. Please do not power on the gimbal until the camera is fixed on the gimbal.Only the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +\/- 1-3cm.