Solar Ultrasonic bird repeller for garden LED flash MoleUltrasound dog control fox rodent rats pestMosquitoesanimal 120db-Alert
3-in-1, Ultrasonic + Strong Light + 120bB Burglar Alarm.
Solar Power & Built-in Ni-MH Rechargeable Battery.
Weather-proofto work all year-round in all weather conditions .
Once Installation forpermanent service!
INTSRUCTION:
1.aONamode: Ultrasonic+ Strong Light
The Passive InfraredSensor ( PIR) detects motion and triggers the ultrasonic speaker emitting a tone that people cannot hear but chases away common outdoor pests like dogs,cats,deer,raccoons,mice, skunks,squirrels and more. Also start the flash Repeller.
2.aALARMamode:Ultrasonic+Strong Light + 120bB Burglar Alarm
Infrared sensing head detects moving objects and triggers 120 dB alarm sound and ultrasonic sound and strong light at the same time torepeldangerous animalsor evildoer.
3.aOFFamode: For turn off the repeller
Specifications:
Size:14x11.1x8.7cm (Stand: 32cm)
Weight:430G
PowerMode:Built-n4x2/3AA Ni-MH rechargeableBatteries.
Power Consumption(Working): 15mA
Power Consumption(Standby):a10uA
Ultrasonic Frequency: 25-61KHZ
AlarmSound: 120dB
Coverage Area:8m /30ft
ASSEMBLING:
1.Unpackitand confirm thatif allparts are present.
2.It`sdesignedforcontinuoususe, with built-in2/3AA size NI-MH rechargeablebabatteries
3.Once turned ON, the red-LED light and ultrasonic signal will activate for 15 seconds. Among the time , there is sound waves for 2.5 seconds at the beginning. At the same time , the white-LED lights flash blasting. Following this activation,the unit willgoto stand-by mode.
4.The location should allow adequate sunlightto keep the batteries fully charged.And makesurethatit`s within the effective range of the repeller .
5.For best results,pleasekeep the repeller head roughly9-10 inches above ground.
6.Takecarenot to stress or break the repeller when installing in hard ground. It is a good idea to prepare the ground for the ground stake to avoid damage to the unit.
7.When the PIR sensor detects motion, red-LED light will beon, The ultrasonic signal and the white-LED lights will run for 15 seconds.Following this, the Repeller will return to stand-by mode.
8.When the device is working and the PIR sensor detects motion, the Device will run for other 15 seconds in the next time.
CAUTION:
aCheck for underground utilitieslikecables or wires before digging or installingto preventpersonal injury, property damage or even death.
aAllow the ALARM Repeller to operate continuously for best results.
aDo not immerse repeller in water.
aDo not cover-up the PIR sensor.
aTo clean the repeller, use a damp-soft cloth and mild soap with Water. Do not use harsh chemicals or abrasive cleaning agentsThat may damage the repeller.
