SPDIF / TOSLINK Power Adapter Digital Optical Audio Splitter Amplifier 1x3 Supports 5.1
New
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 15 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
International
Product code
S-PC-2202
Bob Shop ID
616057439
Introduction:
This SPDIF/TOSLINK Digital Optical Audio splitter allows you to distribute input digital optical audio to three amplifiers or receivers, seamlessly and flawlessly without degradation. It supports LPCM2.0, DTS and Dolby-AC3 audio formats.
Features:
1. One ways of optical fiber signal input splitter to three sets of SPDIF/TosLink signal receiving device
2. Maintain digital sonic integrity and provides crystal clear digital sound quality over the long range
3. Support signal retiming
4. One way optical fiber signal splits into three identical outputs at the same time
5. Support Dolby Digital & DTS 5.1
6. Support LPCM Stereo 32 kHz 44.1 kHz 48 kHz and 96 kHz
7. Integrated circuit implementation delivers unsurpassed reliability and fidelity. Virtually no loss of quality
8. Use optical fiber cable loss less the 0.2Db/m, Output distance can be up to 40m.
9. Over-voltage protection
10. Plug and play, Installs in minutes
11. DC 5V/500mA power supply
Specification:
1. Audio format support: LPCM2.0/DTS/Dolby-AC3
2. Peak wave length: 650nm
3. Max baud rate: 16Mbps
4. Output cable distance: >= 40m (Use the optical fiber cable loss less the 0.2Db/m)
5. Max working current: 100mA
6. Input: AC (50HZ, 60HZ) 100V-240V
7. Output: DC5V/500mA
8. Operating Temperature range :( 0 to +40 Celsius)
9. Operating Humidity range: 5 to 90 percent RH (No Condensation)
10. Weight: 35g
11. Dimension: 54mm x 54mm x 23.5mm
This SPDIF/TOSLINK Digital Optical Audio splitter allows you to distribute input digital optical audio to three amplifiers or receivers, seamlessly and flawlessly without degradation. It supports LPCM2.0, DTS and Dolby-AC3 audio formats.
Features:
1. One ways of optical fiber signal input splitter to three sets of SPDIF/TosLink signal receiving device
2. Maintain digital sonic integrity and provides crystal clear digital sound quality over the long range
3. Support signal retiming
4. One way optical fiber signal splits into three identical outputs at the same time
5. Support Dolby Digital & DTS 5.1
6. Support LPCM Stereo 32 kHz 44.1 kHz 48 kHz and 96 kHz
7. Integrated circuit implementation delivers unsurpassed reliability and fidelity. Virtually no loss of quality
8. Use optical fiber cable loss less the 0.2Db/m, Output distance can be up to 40m.
9. Over-voltage protection
10. Plug and play, Installs in minutes
11. DC 5V/500mA power supply
Specification:
1. Audio format support: LPCM2.0/DTS/Dolby-AC3
2. Peak wave length: 650nm
3. Max baud rate: 16Mbps
4. Output cable distance: >= 40m (Use the optical fiber cable loss less the 0.2Db/m)
5. Max working current: 100mA
6. Input: AC (50HZ, 60HZ) 100V-240V
7. Output: DC5V/500mA
8. Operating Temperature range :( 0 to +40 Celsius)
9. Operating Humidity range: 5 to 90 percent RH (No Condensation)
10. Weight: 35g
11. Dimension: 54mm x 54mm x 23.5mm