Step Down Buck Converter Voltage + Current 50V 5A 250W Panel Mount Colour Display LOCAL STOCK

Name: Step Down Buck Converter Voltage + Current 50V 5A 250W Panel Mount Colour Display **LOCAL STOCK**
SKU: STE375B
Price: 650.00 ZAR
Availability: InStock

New

Watch

Diy Select - Cape Town7253

100.00% Positive ratings

Shipping

Standard courier shipping from R30

R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate

Free collection from Vasco Estate, Cape Town

The seller allows collection for this item and will be in contact with the full collection address once the order is ready. Ready for collection by Wednesday, 15 May.

Ready to ship in

The seller has indicated that they will usually have this item ready to ship within 2 business days. Shipping time depends on your delivery address. The most accurate delivery time will be calculated at checkout, but in general, the following shipping times apply:

Standard Delivery

Main centres:	1-3 business days
Regional areas:	3-4 business days
Remote areas:	3-5 business days

Buyer Protection How you're covered

Get it now, pay later

Product information

Condition:

New

Location:

South Africa

Product code:

STE375B

Bob Shop ID:

613664897

Step Down, Voltage + Current:

Specifications:

Model: WZ5005E
Input Voltage Range: 6-55V DC
Output Voltage Range: 0-50V DC
Output Current Range: 0-5A
Output Power Range: 0-250W
Typical Value of Output Ripple: 150mV peak value
Normal Operating Temperature Range: -10~40 Deg C
Capacity Measurement Range: 0 -99999.999AH
Statistical Error of Capacity Energy: ±2%
Statistical Time Range: 0-10000s
Depressurization Mode: differential pressure >0.05%+1V
Size: 79 x 43 x 54 mm

Functions:

Soft start: Yes
Protection Mechanism:
- Input anti-reverse protection;
- Input under-voltage protection (5.8-50V adjustable, default 5.8V);
- Output over-voltage protection (0-52.00V adjustable, default 52V);
- Output over-current protection (0 -5.200A adjustable, default 5.2A);
- Output over power protection (0-260W adjustable, default 260W);
- Overtime protection (adjustable from 0-100h, closed by default);
- Over-capacity protection (adjustable from 0 -99.99Ah, closed by default)

Precautions:

- Module input IN- and output OUT- cannot be short-circuited, otherwise the constant current function is invalid.
- Please ensure that the power of power supply is always greater than the power required by output load!
- This module is a buck module, input voltage is higher than output voltage, and a certain margin is left. If you want to output at full load, input voltage should be 55V.
- The module generates severe heat when used in high power, and temperature is high. Be careful of burns! Please pay attention to ventilation and heat dissipation when using for a long time with high power!
- The module has input under-voltage protection function, the default is about 5.8V (can be set). When lower than this value, it will automatically disconnect the input. Attention: The voltage at the module port is lower than under-voltage protection threshold. When input current is relatively large, do not ignore the voltage division on input wire.
- Electronic knowledge is highly recommended.
- It is not designed for medical, life-saving, life-sustaining and other purposes, and cannot be used in dangerous places such as coal mine oil depots.