This item has closed 1 buyer bought 1 item
View the relisted Item
View other items offered by Diy Select - Cape Town8401

Similar products

Step Down Buck Converter Lithium Charge Board Voltage + Current XL4005 5A **LOCAL STOCK**
R99.00
Step Down Buck Converter Voltage Constant Current XL4016 300W **LOCAL STOCK**
R129.00
Step Down Buck Converter 300W 20A Voltage Current **LOCAL STOCK**
R167.00
Step Down Buck Converter Voltage 5A XL4015 **LOCAL STOCK**
R49.00
Step Down Buck Converter Voltage + Current 50V 5A 250W Panel Mount Display + Knob **LOCAL STOCK**
Sold

Step Down Buck Converter Voltage + Current 50V 5A 250W Panel Mount Display + Knob **LOCAL STOCK**

2 were available / new
R375.00
Shipping
R35.00 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30.00 surcharge. This will be calculated at checkout if applicable.
Check my rate
The seller allows collection for this item. Buyers will receive the collection address and time once the order is ready.
The seller has indicated that they will usually have this item ready to ship within 2 business days. Shipping time depends on your delivery address. The most accurate delivery time will be calculated at checkout, but in general, the following shipping times apply:
 
Standard Delivery
Main centres:  1-3 business days
Regional areas: 3-4 business days
Remote areas: 3-5 business days
Buyer protection
Get it now, pay later

Product details

Condition
New
Location
South Africa
Product code
STE375A
Bob Shop ID
627492803

Step Down, Voltage + Current:

 

Specifications:

Model: WZ5005L
Input Voltage Range: 6-55V
Output Voltage Range: 0-50V
Output Current Range: 0-5A
Output Power Range: 0-250W
Typical Value of Output Ripple: 150mV peak value
Normal Operating Temperature Range: -10 - 40
Capacity Measurement Range: 0 -99.99AH
Statistical Error of Capacity Energy: ±2%
Statistical Time Range: 0 -100 hour
Depressurization Mode: differential pressure >0.05%+1V
Size: 79 x 43 x 42 mm

 

Functions:

Soft start: Yes
Protection Mechanism:
- Input anti-reverse protection;
- Input under-voltage protection (5.8-50V adjustable, default 5.8V);
- Output over-voltage protection (0-51.00V adjustable, default 51V);
- Output over-current protection (0 -5.100A adjustable, default 5.1A);
- Output over power protection (0-260W adjustable, default 260W);
- Overtime protection (adjustable from 0-100h, closed by default);
- Over-capacity protection (adjustable from 0 -99.99Ah, closed by default)

 

Precautions:

- Module input IN- and output OUT- cannot be short-circuited, otherwise the constant current function is invalid.
- Please ensure that the power of power supply is always greater than the power required by output load!
- This module is a buck module, input voltage is higher than output voltage, and a certain margin is left. If you want to output at full load, input voltage should be 55V.
- The module generates severe heat when used in high power, and temperature is high. Be careful of burns! Please pay attention to ventilation and heat dissipation when using for a long time with high power!
- The module has input under-voltage protection function, the default is about 5.8V (can be set). When lower than this value, it will automatically disconnect the input. Attention: The voltage at the module port is lower than under-voltage protection threshold. When input current is relatively large, do not ignore the voltage division on input wire.
- Electronic knowledge is highly recommended.
- It is not designed for medical, life-saving, life-sustaining and other purposes, and cannot be used in dangerous places such as coal mine oil depots.



 

 

Please see all our listings here:
https://www.bidorbuy.co.za/seller/4397469

Recently viewed

See more
South African Practical Problem Solver - Hardcover - Reader`s Digest
R50.00
20% OFF
Mini Iron on Patch
R44.00 R55.00
Xbox 360 Generic Battery Pack 4 in 1
R170.00
OPERATIONAL AMPLIFIER SMD MCP6021-I/SN
R24.01