Main centres: | 1-3 business days |
Regional areas: | 3-4 business days |
Remote areas: | 3-5 business days |
Sun Command Pool Heating Panels uses flat panels or collectors to harness the sun's energy to heat your pool water. These solid polypropylene panels have a 50mm inlet and outlet header that directs the water through small channels for maximum heat transfer.
By using a pool filter and cover, you can efficiently raise your pool's temperature by 8 to 12 degrees Celsius. This eco-friendly and cost-effective method can extend your swimming season up to 9 months of the year.
Trust our expertise! Follow the sizing guidelines below for optimal results: 28-32 degrees Celsius is ideal for most social swimmers.
Solar pool heating sizing based on 3m panels
- 2 Panels are ideal for small jetted pools, spas and Jacuzzi's reducing pump circulation time to as little as 3 hours per day during the warmer months. A temperature controller is however recommended to ensure that the water temperature does not exceed 40 Degrees Celsius that can cause PVC pipes to melt.
For outdoor pools:
Indoor Pools:
DIY Kit Supplied for the 2 Panels is as follows:
(2) x Solar Panels
(2) x Backing sheets
(1) x PVC Glue
(10) x Hose Clamps
(2) x EPDM End Caps
(2) x 50mm PVC-Poly Adaptor
(4) x EPDM Connectors
(20) x 50mm PVC 90 Degree Elbows
(4) x 50mm PVC Connectors
(3) x 50mm PVC T-Piece
(4) x 50mm PVC 45 Deg
(1) x Ball Valve Glued - drill 8mm hole {Bypass ballvalve}
(2) x Ball Valve Glued {Shut-off ballvalves}
(1) x 50mm PVC Non-return valve
(1) x PVC tank adaptor
(1) x Nylon Reducing bush
(1) x Vacuum breaker
(2) x PTFE Tape
(15m) x Nylon Ski Rope
Tools Required for Installation
On a Metal roof extra items required:
Diagram of solar pool heating Installation
Conditional carry-in warranty: 5 years
1.Subject to use of a backing sheet
2.Installation done insuring the panels drain all water when the pump is not working