Syclone Saver - Instant Water Heater

Syclonesaver - Ultra Efficient Instant Water Heaters

• Heats water on demand. No re-heating costs.
• Easy installation, Simple to use and Tamperproof.

The  SycloneSaver is ideal for use in Hairdressing Salons, Sports Shower Facilities, Granny Flats, Servants Quarters, Kitchens, Schools, Bathroom sinks and showers, All work areas and Ablution Blocks.

Save up to 77%
of your secondary water heating costs!!!

comes with a...
 1 year warrantee
and is approved to the specifications of SANS/ IEC 60335--35;2006/7

A test report compiled by Mr. M Brown (PR Eng) in 1980 includes the comparison of an instant water heating system (6.4kw) and a 100l geyser (with a 2kw element) being used in a home with a family of five. On a daily basis, for the purposes of the comparison, it was assumed that each of the family members showered for 4 minutes when using the instant water heater or shared two small bath’s of roughly 2000mm deep when using the 100l geyser. The water coming into the instant water heater entered at roughly 15 degrees Celsius and was heated to approximately 40 degrees. The geyser was set to maintain its temperature at 70 degrees Celsius and the bath water was mixed to get to an average temperature of about 40 degrees. A third scenario was also tested where a 35l Storage system was maintained at 50 degrees Celsius running on a 2kw element with a reheating time of 1.29 hours. Both the 35l system and the syclonesaver were tested using a 4l/min showerhead.

The Syclonesaver is currently available in 3 models:

SSAV09 (3.5kw Unit)

SSAV11 (6.4kw Unit)

SSAV12 (6.4kw Unit)

For use where warm water is required. Hair salons, hand basins, and light showers. No restriction between unit and point of use. (Open outlet system)

Ideal for use in granny flats, kitchens, and hair salons etc. (Open outlet system)

A 200 - 400kpa pressure regulator and relief valve must be fitted. Can be used as a multiple outlet heater.

www.syclonesaver.co.za